大型仪器设备资源信息网络化共享平台的设计与实现

发布时间：2019-01-03 07:43

【摘要】：网络化制造是网络技术、信息技术与全球化制造模式相结合的产物，它能够实现信息共享，，从而使企业间全球化的分工协作变得更便捷。但我国的网络化制造的理论、方法和系统都还处于发展的初期阶段，还有大量的研究工作要做。因此，迫切需要加大网络化制造研究与系统开发研究的力度。制造业是国民经济和社会发展的物质基础，是一个国家综合国力的重要体现。我国的制造业存在资金少、设备资源短缺、技术相对封闭等问题，即使有限的设备也没有得到充分的利用。本文运用网络技术，研究开发能够实现大型仪器设备共享的网络平台，以解决设备资源短缺、设备利用不充分等问题，实现仪器设备资源真正意义上的共享，从而提高设备的利用率。通过对现代制造业的新技术、发展环境与趋势以及网络化制造的现状的分析，着重讨论基于快速成型制造技术的设备资源共享应用系统的要求，提出一种能够支持企业间设备资源信息共享的模式。通过用户需求分析、系统需求分析、系统各模块的需求分析和非功能性需求分析，确定该系统的体系结构以及运行模式，对系统进行总体设计和实现，包括开发框架技术、数据库技术、系统实现技术和信息共享技术。研究开发出一套基于快速制造技术的大型仪器设备资源信息网络化共享系统，并将该系统应用到实践中。
[Abstract]:Networked manufacturing is the result of the combination of network technology, information technology and global manufacturing mode. It can realize information sharing and make the global division of labor and cooperation between enterprises more convenient. However, the theory, method and system of networked manufacturing in China are still in the initial stage of development, there is still a lot of research work to be done. Therefore, it is urgent to strengthen the research on networked manufacturing and system development. Manufacturing industry is the material basis of national economy and social development and the important embodiment of a country's comprehensive national strength. There are some problems in our manufacturing industry, such as lack of capital, shortage of equipment resources and relatively closed technology. Even the limited equipment has not been fully utilized. In this paper, we use network technology to research and develop a network platform that can realize the sharing of large scale instruments and equipments, so as to solve the problems of shortage of equipment resources and insufficient utilization of equipment, and realize the sharing of equipment resources in the real sense. Thus, the utilization rate of the equipment is improved. Based on the analysis of the new technology, development environment and trend of modern manufacturing industry and the present situation of networked manufacturing, the requirements of equipment resource sharing application system based on rapid prototyping manufacturing technology are discussed. This paper presents a model to support the sharing of equipment resources among enterprises. Through the user requirement analysis, the requirement analysis of each module of the system and the non-functional requirement analysis, the system architecture and operation mode are determined, and the overall design and implementation of the system, including the development framework technology, are carried out. Database technology, system implementation technology and information sharing technology. Based on rapid manufacturing technology, a networked information sharing system for large-scale instrument and equipment resources is developed and applied to practice.
【学位授予单位】：沈阳工业大学
【学位级别】：硕士
【学位授予年份】：2014
【分类号】：TP393.09

【参考文献】