基于Web的产品协同配置系统研究
发布时间：2019-01-08 12:38
【摘要】：计算机技术和网络正在快速发展，企业实现网络化管理已显得十分重要。当代市场要求企业能够不断创新，来适应不断变化的新情况，并且需要企业有快速的适应客户个性化要求的能力，开发高效快捷的生产方式迫在眉睫，以Web为基础的产品协同配置系统把互联网和产品生产结合在一起，实现产品配置的智能化和自动化，大大的提高了企业的生产效率。 本课题利用多层次映射配置方法，完善产品配置系统的模块划分，对系统的实例库（产品协同配置系统中零部件的数据信息数据库）进一步的扩充和完善，即增加了产品配置系统中制袋机动力模块，将实现多需求复合条件下的筛选配置。并且完善了产品配置过程中的变型设计系统，当在产品协同配置过程中，零件数据库中已有的组件和零部件不能达到客户需求的时候，，利用变型设计系统高效配置出所需部件。原有的变型设计是基于几何尺寸的变型设计，不能改变零件的结构只能改变大小，特征设计可以使开发者结合通用特征如孔、凹槽等来构建和改变既有零件结构。 本文对产品协同配置系统的实现及相关操作进行了详细的阐述，在产品配置过程中需要对产品的信息进行管理，如零部件管理、人员添加管理、图纸文件上传下载、聊天室功能等，本课题基于Web的产品协同配置系统将实现以上功能的网络协同。并且对实现产品协同配置系统所用的技术和开发平台等进行深入研究，利用Web对产品进行网络发布，并最终对产品协同配置系统的可行性进行验证。
[Abstract]:With the rapid development of computer technology and network, it is very important for enterprises to realize network management. The contemporary market requires the enterprise to innovate constantly to adapt to the changing new situation, and needs the enterprise to have the ability to adapt to the customer's individuation request quickly, so it is urgent to develop the efficient and fast production mode. The product cooperative configuration system based on Web combines the Internet and product production to realize the intelligence and automation of product configuration and greatly improve the production efficiency of enterprises. This topic uses multi-level mapping configuration method, consummates the module division of the product configuration system, further expands and consummates the system instance database (the data information database of the parts in the product cooperative configuration system). That is to say, the power module of bag making machine is added in the product configuration system, which will realize the screening configuration under the condition of multi-requirement compound. And improved the variant design system in the process of product configuration. When the components and components in the part database can not meet the needs of customers in the process of product collaborative configuration, the variant design system is used to efficiently configure the required components. The original variant design is based on the geometric size of the variant design, can not change the structure of the part can only change the size, feature design can make developers combined with common features such as holes, grooves and so on to build and change the existing part structure. In this paper, the realization and related operation of the product cooperative configuration system are described in detail. In the process of product configuration, the information of the product should be managed, such as parts management, personnel addition management, drawing file upload and download, etc. Chat room function, this subject based on Web product collaboration configuration system will achieve the above functions of network collaboration. The technology and development platform used to realize the product collaborative configuration system are deeply studied, and the product network is released by using Web. Finally, the feasibility of the product collaborative configuration system is verified.
【学位授予单位】：河北工业大学
【学位级别】：硕士
【学位授予年份】：2014
【分类号】：TP393.09
本文编号：2404606
[Abstract]:With the rapid development of computer technology and network, it is very important for enterprises to realize network management. The contemporary market requires the enterprise to innovate constantly to adapt to the changing new situation, and needs the enterprise to have the ability to adapt to the customer's individuation request quickly, so it is urgent to develop the efficient and fast production mode. The product cooperative configuration system based on Web combines the Internet and product production to realize the intelligence and automation of product configuration and greatly improve the production efficiency of enterprises. This topic uses multi-level mapping configuration method, consummates the module division of the product configuration system, further expands and consummates the system instance database (the data information database of the parts in the product cooperative configuration system). That is to say, the power module of bag making machine is added in the product configuration system, which will realize the screening configuration under the condition of multi-requirement compound. And improved the variant design system in the process of product configuration. When the components and components in the part database can not meet the needs of customers in the process of product collaborative configuration, the variant design system is used to efficiently configure the required components. The original variant design is based on the geometric size of the variant design, can not change the structure of the part can only change the size, feature design can make developers combined with common features such as holes, grooves and so on to build and change the existing part structure. In this paper, the realization and related operation of the product cooperative configuration system are described in detail. In the process of product configuration, the information of the product should be managed, such as parts management, personnel addition management, drawing file upload and download, etc. Chat room function, this subject based on Web product collaboration configuration system will achieve the above functions of network collaboration. The technology and development platform used to realize the product collaborative configuration system are deeply studied, and the product network is released by using Web. Finally, the feasibility of the product collaborative configuration system is verified.
【学位授予单位】：河北工业大学
【学位级别】：硕士
【学位授予年份】：2014
【分类号】：TP393.09
【参考文献】
相关期刊论文 前10条
1 吴建峰;王洪磊;陈晓琴;;PRO/E的二次开发初探[J];装备制造技术;2009年01期
2 谢剑猛,许飞;基于IIS的Web网站的安全研究与设计[J];华东交通大学学报;2003年05期
3 张祥林;邓磊;;基于参数化模板的大批量定制设计方法[J];华中科技大学学报(自然科学版);2007年08期
4 张继春;罗念宁;;一种Pro/E二次开发的新方法[J];机床与液压;2006年12期
5 荣烈润;信息发动机——产品数据管理[J];机电一体化;2005年05期
6 张文增,赵冬斌,孙振国,陈强;ASP.NET——动态网页开发趋势[J];计算机工程;2002年03期
7 钱晓明,王宁生,陈蔚芳,薛善良;面向快速变型设计的产品结构模型研究[J];计算机集成制造系统-CIMS;2003年01期
8 朱海平,王忠浩,李培根;基于PDM的工程变更管理研究[J];计算机集成制造系统-CIMS;2003年07期
9 鲁玉军,余军合,祁国宁,吴扬东;基于事物特性表的产品变型设计[J];计算机集成制造系统-CIMS;2003年10期
10 苏少辉,祁国宁,顾巧祥,郑克勤,余军合;面向大批量定制设计的CAD系统与PDM系统的集成研究[J];计算机集成制造系统;2005年06期
本文编号：2404606
本文链接：https://www.wllwen.com/guanlilunwen/ydhl/2404606.html
