纳米银导电墨水的制备及电极性能研究
发布时间：2018-09-08 16:12
【摘要】：用硝酸银、己二酸二酰肼和葡萄糖为主要原料,通过化学还原法制备出粒径为30~50 nm的纳米银颗粒;将其分散于特殊配制比例的溶剂中,制备得到纳米银导电墨水。将纳米银导电墨水高精度图案化喷墨打印,分析了纳米银的形貌及其导电性能;研究了烧结温度和烧结时间对打印电极电阻率的影响,结果表明,200℃烧结40 min,电阻率为0.34 m?·cm的较低值。
[Abstract]:Silver nanoparticles with a diameter of 30 ~ 50 nm were prepared by chemical reduction method using silver nitrate, dihydrazide adipate and glucose as main raw materials. The high precision patterned ink jet printing of nano-silver conductive ink was carried out, and the morphology and conductivity of nano-silver were analyzed, and the effects of sintering temperature and sintering time on the resistivity of the printing electrode were studied. The results show that the resistivity of 40 min, sintered at 200 鈩，
本文编号：2231032
[Abstract]:Silver nanoparticles with a diameter of 30 ~ 50 nm were prepared by chemical reduction method using silver nitrate, dihydrazide adipate and glucose as main raw materials. The high precision patterned ink jet printing of nano-silver conductive ink was carried out, and the morphology and conductivity of nano-silver were analyzed, and the effects of sintering temperature and sintering time on the resistivity of the printing electrode were studied. The results show that the resistivity of 40 min, sintered at 200 鈩，
本文编号：2231032
本文链接：https://www.wllwen.com/kejilunwen/cailiaohuaxuelunwen/2231032.html
