基于模块化组态设计的新型配电自动化终端
发布时间：2018-09-04 18:43
【摘要】：基于模块化组态设计的配电终端设计与开发,主要是在设计时将配电终端硬件按照不同的功能需求设计为独立的硬件模块,模块可以采用导轨安装等方式进行任意组合,模块安装不再受限于机箱尺寸及插槽数量,因此模块种类及数量可以按照工程需求任意配置,模块间通过带冲突检测的快速通道抢占机制进行通信且模块实现即插即用。文中主要从硬件模块分类及结构设计、高速总线接口及通信机制设计、模块自适应接入设计等方面对所提出的基于模块化组态设计的配电终端进行研究和阐述,主要包含了高速总线控制技术、基于冲突检测的高速总线资源抢占技术、基于自适应接入的模块即插即用技术等内容。
[Abstract]:The design and development of distribution terminal based on modular configuration design is mainly to design the distribution terminal hardware as an independent hardware module according to different functional requirements. The module installation is no longer limited by the size of the chassis and the number of slots, so the type and number of modules can be arbitrarily configured according to the engineering requirements. The modules communicate through the fast channel preemption mechanism with conflict detection, and the modules realize plug and play. In this paper, the hardware module classification and structure design, high-speed bus interface and communication mechanism design, module adaptive access design and other aspects of the proposed distribution terminal based on modular configuration design are discussed. It mainly includes high speed bus control technology, high speed bus resource preemption technology based on conflict detection, module plug and play technology based on adaptive access and so on.
【作者单位】： 南瑞集团公司(国网电力科学研究院);国电南瑞科技股份有限公司;四川省银河化学股份有限公司;
【基金】：国家电网公司科技项目“具备配电线路自组网能力的智能配电监控终端技术研究”~~
【分类号】：TM76
[Abstract]:The design and development of distribution terminal based on modular configuration design is mainly to design the distribution terminal hardware as an independent hardware module according to different functional requirements. The module installation is no longer limited by the size of the chassis and the number of slots, so the type and number of modules can be arbitrarily configured according to the engineering requirements. The modules communicate through the fast channel preemption mechanism with conflict detection, and the modules realize plug and play. In this paper, the hardware module classification and structure design, high-speed bus interface and communication mechanism design, module adaptive access design and other aspects of the proposed distribution terminal based on modular configuration design are discussed. It mainly includes high speed bus control technology, high speed bus resource preemption technology based on conflict detection, module plug and play technology based on adaptive access and so on.
【作者单位】： 南瑞集团公司(国网电力科学研究院);国电南瑞科技股份有限公司;四川省银河化学股份有限公司;
【基金】：国家电网公司科技项目“具备配电线路自组网能力的智能配电监控终端技术研究”~~
【分类号】：TM76
【相似文献】
相关期刊论文 前10条
1 ;日本配电自动化技术的发展与展望[J];农村电气化;2000年06期
2 赵恂传,秦仁伟;期望铁路配电自动化[J];工程设计CAD与智能建筑;2000年05期
3 彭辉,孙，
本文编号：2223026
本文链接：https://www.wllwen.com/kejilunwen/dianlidianqilunwen/2223026.html
