当前位置:主页 > 科技论文 > 电子信息论文 >

小型化环形双模谐振器及其滤波器件设计技术研究

发布时间:2018-05-24 22:21

  本文选题:环形双模谐振器 + 全集总参数 ; 参考:《南京邮电大学》2017年硕士论文


【摘要】:滤波器件的小型化设计技术一直是高密度集成无线微波通信系统的关键,也是小型化微波系统设计的重点和难点。基于环形双模谐振器的滤波器能够在提高滤波器选择性能的同时有效减小滤波器的尺寸,从而被广泛应用于滤波器件的设计。同时,随着集成无源器件(Integrated Passive Device,IPD)技术的发展使得滤波器件的进一步小型化成为了可能。因此,为了满足目前各类先进微波系统对器件尺寸所提出的更高要求,本文对基于IPD技术的环形双模谐振器及其相关滤波器件的小型化设计技术进行了研究,主要工作内容及创新点如下:1.提出了一种全集总参数元件的双模谐振器拓扑结构,定量给出了集总参数结构的环形双模带通滤波器电路中各集总参数元件初值计算方法,并采用薄膜IPD技术,设计了一款基于集总参数的超小型化环形双模带通滤波器,其中心频率为1GHz,物理面积尺寸为4.0mm×2.6mm (0.0133λ0×0.0087λ0) 。2.基于所提出的全集总元件双模谐振器的拓扑结构,采用IPD技术,设计了一种基于集总参数双模谐振器的小型化C波段双工器,该双工器采用一组并联短路微带线来构成其阻抗匹配结构,整体面积尺寸为2.488mm×2.668mm。3.对全集总参数的双模带通滤波器中电容元件对滤波器性能的影响进行深入研究,给出了滤波器中心频率以及带宽随电容元件的变化规律,在此基础上,设计一款基于集总参数双模谐振器的小型化UHF频段的三维混合集成可调带通滤波器,该滤波器的核心尺寸为14.42mm×9.306mm×2.394mm 。
[Abstract]:The miniaturization design technology of filter parts is the key of high density integrated wireless microwave communication system, and it is also the key and difficult point in the design of miniaturized microwave system. The filter based on ring double mode resonator can improve the performance of filter selection and reduce the size of filter, so it is widely used in the design of filter parts. At the same time, with the development of integrated passive device integrated Passive device, it is possible to further miniaturize the filter. Therefore, in order to meet the higher requirements of various advanced microwave systems for device size, the miniaturization design technology of ring dual-mode resonator and its related filter parts based on IPD technology is studied in this paper. The main contents and innovations are as follows: 1. In this paper, a topology structure of dual-mode resonator with lumped parameters is proposed. The method of calculating the initial values of each lumped parameter element in the loop dual-mode band-pass filter circuit with lumped parameter structure is presented quantitatively, and the thin film IPD technique is used. A super-miniaturized ring dual-mode band-pass filter based on lumped parameters is designed. Its center frequency is 1GHz and the physical area size is 4.0mm 脳 2.6mm 0.0133 位 0 脳 0.0087 位 0) .2. Based on the proposed topology of the full lumped element dual-mode resonator, a miniaturized C-band duplex based on lumped parameter dual-mode resonator is designed by using IPD technology. A series of parallel short circuit microstrip lines are used to construct the impedance matching structure. The overall area size of the duplex is 2.488mm 脳 2.668mm. 3. The effect of capacitive elements on the performance of dual-mode band-pass filters with lumped parameters is studied, and the variation of the central frequency and bandwidth of the filters with the capacitive components is given. A three-dimensional hybrid tunable band-pass filter based on lumped parameter dual-mode resonator is designed for miniaturized UHF band. The core size of the filter is 14.42mm 脳 9.306mm 脳 2.394mm.
【学位授予单位】:南京邮电大学
【学位级别】:硕士
【学位授予年份】:2017
【分类号】:TN713

【参考文献】

相关期刊论文 前1条

1 李应选;用于集成无源器件的工艺技术[J];电子产品世界;2001年01期

相关博士学位论文 前2条

1 金秀华;小型环形结构微波滤波器研究[D];南京邮电大学;2014年

2 钱可伟;基于LTCC技术的无源器件研究[D];电子科技大学;2012年

相关硕士学位论文 前2条

1 李旭东;LTCC集总参数双工器设计与建模[D];西安电子科技大学;2011年

2 张大龙;基于LTCC技术的微波传输线建模与设计[D];西安电子科技大学;2007年



本文编号:1930830

资料下载
论文发表

本文链接:https://www.wllwen.com/kejilunwen/dianzigongchenglunwen/1930830.html


Copyright(c)文论论文网All Rights Reserved | 网站地图 |

版权申明:资料由用户e851d***提供,本站仅收录摘要或目录,作者需要删除请E-mail邮箱bigeng88@qq.com