基于FPGA的直接数字频率合成器的设计
发布时间：2018-12-26 14:43
【摘要】：基于FPGA器件EP1K30QC208芯片,采用VHDL设计实现了一个相位、频率均可控制的数字频率合成器,并在ZY11EDA13BE试验系统中完成硬件测试。经实验验证,输出波形达到了技术要求,性能良好,控制方便,证明了基于FPGA的DDS设计的可靠性和可行性。
[Abstract]:Based on the EP1K30QC208 chip of FPGA device, a digital frequency synthesizer with phase and frequency can be controlled by VHDL is designed and implemented, and the hardware is tested in the ZY11EDA13BE test system. The experimental results show that the output waveform meets the technical requirements, the performance is good and the control is convenient. The reliability and feasibility of the DDS design based on FPGA are proved.
【作者单位】： 巢湖学院;
【分类号】：TN74
[Abstract]:Based on the EP1K30QC208 chip of FPGA device, a digital frequency synthesizer with phase and frequency can be controlled by VHDL is designed and implemented, and the hardware is tested in the ZY11EDA13BE test system. The experimental results show that the output waveform meets the technical requirements, the performance is good and the control is convenient. The reliability and feasibility of the DDS design based on FPGA are proved.
【作者单位】： 巢湖学院;
【分类号】：TN74
【参考文献】
相关期刊论文 前3条
1 张先志;;VHDL实现的基于DDS技术的干扰信号[J];电子工程师;2008年06期
2 王艳芬;古汉招;林良端;赖叶华;;基于DDS的多波形发生器[J];科技信息(科学教研);2008年21期
3 杨守良;基于LPM_ROM的正弦信号发生器电路实现方法[J];微计算机信息;2005年03期
【共引文献】
相关期刊论文 前10条
1 孙丽华,王磊R，
本文编号：2392268
本文链接：https://www.wllwen.com/kejilunwen/dianzigongchenglunwen/2392268.html
