浮体绳轮波浪发电装置传动系统研究

发布时间：2018-03-06 02:27

本文选题：波浪能发电　切入点：运动分析　出处：《山东大学》2013年硕士论文　论文类型：学位论文

【摘要】：由于人类社会对传统化石能源的过度依赖,已导致目前世界范围内的能源和环境双重危机,海洋波浪能作为一种清洁的可再生能源,日益受到人们的关注。浮体绳轮波浪发电装置是一种新型的漂浮式震荡浮子发电技术,该技术利用浮体绳轮机构从波浪中采集能量,具有结构简单、制造布放维护成本低、发电效率较高等特点。本文重点研究了浮体绳轮波浪发电装置的传动系统。笔者从理论分析、设计与计算、仿真研究和陆地模拟试验四个方面,对浮体绳轮波浪发电装置的传动系统进行了研究。论文主要的研究内容如下 1.以微幅波理论为基础,对浮体在波浪中的运动规律进行了研究并介绍了浮体绳轮波浪发电装置的组成结构和工作原理。 2.本文设计了浮体绳轮波浪发电装置的液压传动系统,建立了浮体绳轮机构的运动模型,并分别运用Matlab数值解析法和Adams建模仿真法对卷筒的运动规律进行了分析。最后,基于AMEsim软件对所设计的液压传动系统进行了计算机仿真分析。 3.对陆地模拟试验牵拉平台进了设计,并利用ANSYS Workbench有限元软件对所设计的试验平台主体钢结构进行了线性静力学与模态分析。 4.对所设计的传动系统分别进行了原理试验与效率试验,并对试验结果进行了分析研究。
[Abstract]:Due to the excessive dependence of human society on traditional fossil energy, which has led to the current worldwide energy and environmental crisis, ocean waves can be used as a clean renewable energy. The floating rope wheel wave power generation device is a new floating oscillating float power generation technology. The technology uses floating rope wheel mechanism to collect energy from the wave, has simple structure and low cost of manufacturing arrangement and maintenance. High power generation efficiency and other characteristics. In this paper, the transmission system of the floating rope wheel wave generator is studied from four aspects: theoretical analysis, design and calculation, simulation research and land simulation test. The main contents of this thesis are as follows. 1. Based on the theory of micro-amplitude wave, the motion law of floating body in wave is studied, and the composition structure and working principle of wave generating device with floating rope wheel are introduced. 2. The hydraulic transmission system of the floating rope wheel wave power generating device is designed in this paper, the motion model of the floating body rope wheel mechanism is established, and the motion law of the drum is analyzed by using Matlab numerical analysis method and Adams modeling simulation method, respectively. The hydraulic transmission system is simulated and analyzed based on AMEsim software. 3. The drawing platform of the land simulation test is designed, and the linear statics and modal analysis of the steel structure of the main body of the test platform is carried out by using the finite element software ANSYS Workbench. 4. The principle test and efficiency test of the designed transmission system are carried out, and the experimental results are analyzed.
【学位授予单位】：山东大学
【学位级别】：硕士
【学位授予年份】：2013
【分类号】：P743.2;TH137

【参考文献】