新型圆弧齿线圆柱齿轮齿面方程及参数化建模研究

发布时间：2018-05-05 19:44

本文选题：圆弧齿线圆柱齿轮 + 啮合原理　；参考：《机械传动》2016年08期

【摘要】：圆弧齿线圆柱齿轮是一种具有啮合性能好、重合系数大、传动平稳、噪声低、效率高、使用寿命长等特点的新型齿轮副,其能够很好的弥补现有齿轮传动副的不足。为了进一步研究其特性,根据旋转刀盘法加工圆弧齿线圆柱齿轮的原理和啮合原理,推导了其齿面方程;同时,利用二次开发技术,模拟旋转刀盘法完成了其参数化建模设计,提高了建模效率和有效性,为后续的仿真分析提供了正确的三维模型。
[Abstract]:Circular tooth line cylindrical gear is a new type of gear pair with good meshing performance, large coincidence coefficient, stable transmission, low noise, high efficiency and long service life. It can make up for the deficiency of the existing gear transmission pair. In order to further study its characteristics, according to the principle and meshing principle of machining circular arc tooth line cylindrical gear by rotating cutter disk method, the tooth surface equation is deduced, and the parametric modeling design is completed by using the secondary development technology and the simulation rotating cutter head method. It improves the efficiency and effectiveness of modeling and provides a correct three-dimensional model for subsequent simulation analysis.
【作者单位】：攀枝花学院机械工程学院;四川大学制造科学与工程学院;
【基金】：国家自然科学基金(51375320)
【分类号】：TH132.41

【相似文献】