连接套螺旋槽加工工艺设计
发布时间：2018-08-12 14:31
【摘要】：在针对连接套螺旋槽轮廓的基本结构和工艺特点的分析基础上,结合普通电火花线切割加工机床的基本工作原理和螺旋运动的基本合成原理,提出了一种在普通电火花线切割机床上实现螺旋加工的工艺方法,并通过旋转装置的制作与安装、连接套工件的装夹与定位、加工尺寸计算与程序编制、螺旋槽轮廓的实际加工与过程监测等环节,实现连接套螺旋槽的批量加工。
[Abstract]:Based on the analysis of the basic structure and technological characteristics of the spiral groove profile of the connecting sleeve, the basic working principle of the general WEDM machine tool and the basic synthesis principle of the spiral motion are combined. In this paper, a method of helical machining on the common WEDM machine tool is presented. Through the manufacture and installation of the rotating device, the clamping and positioning of the connecting sleeve workpiece, the calculation of the machining dimension and the programming are carried out. The actual machining and process monitoring of spiral grooves can realize batch machining of spiral grooves.
【作者单位】： 北仑职业高级中学;
【分类号】：TH162;TH133.4
，
本文编号：2179341
[Abstract]:Based on the analysis of the basic structure and technological characteristics of the spiral groove profile of the connecting sleeve, the basic working principle of the general WEDM machine tool and the basic synthesis principle of the spiral motion are combined. In this paper, a method of helical machining on the common WEDM machine tool is presented. Through the manufacture and installation of the rotating device, the clamping and positioning of the connecting sleeve workpiece, the calculation of the machining dimension and the programming are carried out. The actual machining and process monitoring of spiral grooves can realize batch machining of spiral grooves.
【作者单位】： 北仑职业高级中学;
【分类号】：TH162;TH133.4
，
本文编号：2179341
本文链接：https://www.wllwen.com/kejilunwen/jixiegongcheng/2179341.html
