拓展故障维修思路的几个典型例子
发布时间：2018-11-13 09:48
【摘要】：对于轴承圆锥滚动体磨削中使用的无心磨床维修而言,大部分的故障排除方法和精度提升措施基本上都有俗成的规律和套路,即维修重点和中心都放在砂轮轴和导轮轴两大核心部件的调试与维护上。但规律往往不同于定律,有时出现同样的质量问题而设备的故障根源却不尽相同,甚至出乎意料,有时在问题最终解决后才明白原来如此。从3个典型维修例子就不同程度地揭示了个别设备问题不大、故障难找、反复维修也没见好的过程,最终彻底改变了方法才得以解决,其积累的经验足以能够拓展故障维修的思路,使得以后的维修受到启发少走弯路。
[Abstract]:For the maintenance of the centerless grinding machine used in the grinding of the bearing cone rolling body, most of the troubleshooting methods and the accuracy promotion measures basically have common rules and routines. In other words, the maintenance emphasis and center are on the adjustment and maintenance of the two core components: the grinding wheel shaft and the guide wheel shaft. But the law is often different from the law, sometimes the same quality problems occur, but the source of equipment failure is not the same, or even unexpected, sometimes after the final solution of the problem to understand the original. From three typical examples of maintenance, it is revealed to some extent that the problems of individual equipment are not too big, the trouble is difficult to find, and the process of repeated maintenance is not good. Finally, the method is completely changed to be solved. Its accumulated experience can expand the train of thought of fault maintenance, so that the later maintenance is inspired less detours.
【作者单位】： 瓦房店轴承集团有限责任公司;
【分类号】：TH133.3;TG580.6
，
本文编号：2328739
[Abstract]:For the maintenance of the centerless grinding machine used in the grinding of the bearing cone rolling body, most of the troubleshooting methods and the accuracy promotion measures basically have common rules and routines. In other words, the maintenance emphasis and center are on the adjustment and maintenance of the two core components: the grinding wheel shaft and the guide wheel shaft. But the law is often different from the law, sometimes the same quality problems occur, but the source of equipment failure is not the same, or even unexpected, sometimes after the final solution of the problem to understand the original. From three typical examples of maintenance, it is revealed to some extent that the problems of individual equipment are not too big, the trouble is difficult to find, and the process of repeated maintenance is not good. Finally, the method is completely changed to be solved. Its accumulated experience can expand the train of thought of fault maintenance, so that the later maintenance is inspired less detours.
【作者单位】： 瓦房店轴承集团有限责任公司;
【分类号】：TH133.3;TG580.6
，
本文编号：2328739
本文链接：https://www.wllwen.com/kejilunwen/jixiegongcheng/2328739.html
