矿灯智能充电监测管理系统设计

发布时间：2018-05-27 12:33

  本文选题：矿灯 + 充电管理　； 参考：《工矿自动化》2017年12期

【摘要】：针对目前矿灯充电监测管理系统存在扩展性不强、通信方式单一、故障点难以定位等问题,设计了一种矿灯智能充电监测管理系统。该系统充电单元实时采集矿灯状态,控制单元通过RS485总线接收矿灯状态信息并通过CAN总线发送至CAN转以太网模块,然后通过以太网上传至服务器,监控软件根据服务器上传的数据显示矿灯状态,同时可下发矿工信息至充电单元。测试结果表明,该系统可准确地采集矿灯状态,实现对矿灯的实时监控和矿工的信息管理。
[Abstract]:Aiming at the problems of low expansibility, single communication mode and difficulty in locating fault points in the current mine lamp charging monitoring management system, a mine lamp intelligent charging monitoring management system is designed. The charging unit of the system collects the status of mine lamp in real time, and the control unit receives the status information of mine lamp through RS485 bus and sends it to CAN to Ethernet module via CAN bus, then uploads it to the server via Ethernet. The monitoring software can display the status of mine lamp according to the data uploaded by server and send the miner information to the charging unit at the same time. The test results show that the system can accurately collect the status of mine lamp and realize the real-time monitoring of mine lamp and the information management of miners.
【作者单位】： 桂林电子科技大学信息与通信学院;
【基金】：国家自然科学基金资助项目(61362020) 桂林电子科技大学研究生教育创新计划资助项目(2017YJCX36)
【分类号】：TD621
，

本文编号：1942099