破碎、含水复杂条件矿体开采技术研究

发布时间：2018-08-18 07:49

【摘要】：随着社会与经济发展需求的日益增长,矿山的工程技术体系也随之进步和日益完善,资源开采不断向深部发展,地质条件恶化,破碎岩体增多,地应力增大,涌水量加大,带来了深部地压、作业环境恶化、通风和生产成本急剧增加等一系列问题,抑制了生产能力提高和矿产资源的充分回收。因此,加大科技创新的力度,解决深部开采关键技术难题,采用先进的技术和装备,降低深部资源开采带来的安全风险。为深部资源安全、经济、高效开采提供科学的技术途径具有重要意义。本文以云锡松树脚锡矿大箐1360中段以下深部含水破碎的30-14矿体开采方案选择为主要研究内容,在总结分析国内外相关理论和技术发展现状的基础上,开展了以下研究工作：1、开展区域水文地质调查分析,建立区域水文模型,合理预测矿体开采过程中的涌水量变化情况,制定涌水治理措施；2、认真分析矿体的开采技术条件,通过多方案对比,选择合理的采矿方法,并对采切工程布置、凿岩爆破、充填等技术环节进行了研究；3、对研究成果进行工业试验,形成了解决深部含水破碎矿体开采方案选择、工程布置以及回采、充填、施工组织管理等关键问题的实用技术。本文的研究过程是结合工程实践问题,以理论分析为指导,在工程施工中不断总结、研究的过程,设计方案在30-14矿体的开采中得到了验证,并在施工中进行了完善。形成的成果具有安全、可靠、高效、易于推广的的特点,具有很强的代表性,适用于深部接触带、矿岩松散破碎、矿体形态变化复杂的难采矿体开采,是适合个旧东区深部资源开发利用的完整施工技术方案。
[Abstract]:With the increasing demands of social and economic development, the engineering and technical system of the mine is also progressing and improving. The exploitation of resources is developing to the deep, the geological conditions are deteriorating, the broken rock mass is increasing, the in-situ stress is increasing, and the inflow of water is increasing. It has brought about a series of problems such as deep ground pressure, deterioration of operating environment, rapid increase of ventilation and production cost, etc., which has restrained the increase of production capacity and the full recovery of mineral resources. Therefore, we should increase the strength of scientific and technological innovation, solve the key technical problems of deep mining, adopt advanced technology and equipment, and reduce the safety risks brought by deep resource mining. It is of great significance to provide a scientific and technical approach for safe, economical and efficient exploitation of deep resources. In this paper, the selection of mining scheme for 30-14 orebody with deep water-bearing breakage below the middle section of Daqing 1360 in Yunxi Songshujiao Tin Mine is the main research content, on the basis of summing up and analyzing the development status of relevant theories and technologies at home and abroad. The following research work has been carried out: 1, to carry out regional hydrogeological investigation and analysis, to establish regional hydrological models, to reasonably predict the variation of water inflow in the course of ore body mining, to formulate the water gushing treatment measures and to seriously analyze the mining technical conditions of ore bodies, Through the comparison of many schemes, the reasonable mining method is selected, and the technical links such as cutting engineering arrangement, rock drilling blasting, filling and so on are studied, and the results of the research are tested in industry. Practical techniques have been developed to solve the key problems of mining scheme selection, engineering layout, mining, filling, construction organization and management of deep water-bearing broken orebodies. The research process of this paper is to combine the engineering practice problem, take the theory analysis as the instruction, in the engineering construction unceasingly summarizes, the research process, the design scheme has obtained the confirmation in the 30-14 orebody mining, and has carried on the consummation in the construction. The results are safe, reliable, efficient and easy to popularize. They are very representative and suitable for mining difficult mining bodies with deep contact zone, loose broken ore rock and complicated shape change of orebody. Is suitable for Gejiu East District deep resources development and utilization of the complete construction technology.
【学位授予单位】：昆明理工大学
【学位级别】：硕士
【学位授予年份】：2015
【分类号】：TD80

【相似文献】