深井软岩巷道承压环力学模型与理论研究
发布时间:2018-10-23 17:23
【摘要】:建立在锚网喷支护和钢管混凝土支架高强度支护基础上,提出巷道承压环强化支护模型及理论,阐述了承压环的概念,建立承压环的力学模型,并对承压环结构的承栽能力进行理论分析,最后对深井软岩巷道承压环进行分类并提出相应的支护设计方法,巷道承压环强化支护理论作为新的深井巷道支护概念,对于深井软岩巷道支护机理的分析和实际支护工作具有重要意义。
[Abstract]:On the basis of bolt-mesh shotcreting support and high strength support with concrete filled steel tube support, this paper puts forward the model and theory of strengthened support for roadway bearing ring, expounds the concept of pressure ring, and establishes the mechanical model of pressure ring. The bearing capacity of bearing ring structure is analyzed theoretically. Finally, the bearing ring of soft rock roadway in deep shaft is classified and the corresponding supporting design method is put forward. The theory of strengthened supporting ring in roadway is regarded as a new concept of roadway support in deep well. It is of great significance to analyze the supporting mechanism of soft rock roadway in deep well and to support it in practice.
【作者单位】: 华北科技学院安全工程学院;山东建筑大学土木工程学院;
【基金】:国家自然科学基金(51404105) 河北省自然科学基金(E2015508047) 河北省高等学校科学技术研究项目(QN2015325) 中央高校基金科研业务费(3142015085、3142015020)
【分类号】:TD353
本文编号:2289955
[Abstract]:On the basis of bolt-mesh shotcreting support and high strength support with concrete filled steel tube support, this paper puts forward the model and theory of strengthened support for roadway bearing ring, expounds the concept of pressure ring, and establishes the mechanical model of pressure ring. The bearing capacity of bearing ring structure is analyzed theoretically. Finally, the bearing ring of soft rock roadway in deep shaft is classified and the corresponding supporting design method is put forward. The theory of strengthened supporting ring in roadway is regarded as a new concept of roadway support in deep well. It is of great significance to analyze the supporting mechanism of soft rock roadway in deep well and to support it in practice.
【作者单位】: 华北科技学院安全工程学院;山东建筑大学土木工程学院;
【基金】:国家自然科学基金(51404105) 河北省自然科学基金(E2015508047) 河北省高等学校科学技术研究项目(QN2015325) 中央高校基金科研业务费(3142015085、3142015020)
【分类号】:TD353
【相似文献】
相关期刊论文 前1条
1 吴义昌;煤矿矿车轮压环冲模的改进设计[J];煤炭技术;2001年07期
,本文编号:2289955
本文链接:https://www.wllwen.com/kejilunwen/kuangye/2289955.html