三甘醇脱水装置节能设计
发布时间:2017-12-27 05:23
本文关键词:三甘醇脱水装置节能设计 出处:《石油化工应用》2016年12期 论文类型:期刊论文
更多相关文章: 三甘醇脱水 能耗 开米尔能量循环泵 板式换热器 节能 设计
【摘要】:本文通过分析典型天然气三甘醇脱水装置工艺流程,得出能耗偏高的原因,提出采用开米尔能量循环泵替代电泵充分利用高压三甘醇的压力能;用板式换热器替代管壳式换热器,提高贫液进重沸器温度,降低重沸器负荷;并通过Uni Sim软件模拟计算了节约的能耗。通过对典型天然气三甘醇脱水装置工艺流程的分析,得出能耗偏高的原因,提出三甘醇脱水装置节能设计,并通过工艺模拟计算了节约的能耗。
[Abstract]:In this paper, by analyzing the typical process of natural gas three glycol dehydration unit, causes of high energy consumption, the Khyber energy circulating pump instead of electric pump can make full use of high-pressure pressure to three DEG; heat exchangers used instead of tube shell heat exchanger, improve the lean liquid into the reboiler temperature, reduce the reboiler load; and through the Uni Sim simulation software to save energy consumption calculation. By analyzing the technological process of a typical natural gas three ethylene glycol dehydration plant, the reason for the high energy consumption is obtained. The energy saving design of the three glycols dehydration unit is put forward, and the energy saving is calculated through the process simulation.
【作者单位】: 西安长庆科技工程有限责任公司;中国石油长庆油田生产运行处;
【分类号】:TE96
【正文快照】: 三甘醇具有热稳定性好、易于再生、蒸汽压低、携带损失量小,相比其他溶液能获得更大的露点降的特点。我国天然气脱水普遍采用三甘醇脱水工艺。但是,三甘醇脱水装置能耗偏高[1,2]。1能耗分析与节能措施1.1工艺流程典型的天然气三甘醇脱水工艺流程(见图1)。站场来湿天然气经过滤
【相似文献】
相关期刊论文 前10条
1 郭彬;何战友;刘学蕊;景阿宁;王丽莉;刘昌林;;三甘醇失效原因分析及回收研究[J];天然气工业;2006年09期
2 袁俊盛;;二甘醇和三甘醇的综合利用技术进展[J];江苏化工;1991年02期
3 陈强;钱以z,
本文编号:1340427
本文链接:https://www.wllwen.com/kejilunwen/shiyounenyuanlunwen/1340427.html