功能绝缘材料加工工艺对电润湿显示器性能的影响

发布时间：2018-03-06 18:12

本文选题：电润湿显示器　切入点：疏水层性能恢复　出处：《华南师范大学学报(自然科学版)》2015年06期 　论文类型：期刊论文

【摘要】：以通过蒸汽溶解法(Vapor redissolve method)代替高温回流法来恢复氟树脂层的疏水性能,使用氟碳溶剂(HFE7100)蒸汽溶解氟树脂层粗糙表面使其形成溶胶状态,加热蒸发溶剂后使表面恢复疏水性质.对溶解法溶解时间、干燥温度和干燥时间等条件进行了探究,对比了高温回流法和蒸汽溶解法对电润湿显示器产生的物理和光电的影响.蒸汽溶解法在不影响电润湿显示器其他功能的前提下,可以替代高温回流方法恢复氟树脂层的疏水功能并且工艺更简单.
[Abstract]:The hydrophobicity of fluorine resin layer was restored by using Vapor redissolve method instead of high temperature reflux method. The fluorocarbon solvent HFE7100) was used to dissolve the rough surface of fluorine resin layer to form a sol state. The hydrophobic property of the surface was restored after the evaporation solvent was heated. The conditions such as dissolution time, drying temperature and drying time were investigated. The physical and photoelectric effects of high temperature reflux method and steam dissolution method on the electrical wetting display are compared. The steam dissolution method does not affect the other functions of the electrical wetting display. It can replace the high temperature reflux method to restore the hydrophobic function of fluorine resin layer and the process is simpler.
【作者单位】：华南师范大学华南先进光电子研究院;深圳国华光电科技有限公司;
【基金】：国家自然科学基金项目(21303060) 广东省自然科学基金项目(S2013010014418) 教育部引进创新科研团队项目(IRT13064) 广东省创新科研团队项目(2011D039)
【分类号】：TN873;TM21

【参考文献】