基于FPGA的串口与链路口联合通信设计与实现

发布时间：2018-03-08 10:36

  本文选题：FPGA　切入点：RS　出处：《计算机测量与控制》2014年02期 　论文类型：期刊论文

【摘要】：针对某图像跟踪系统的通信需求,提出了一种在FPGA(现场可编程门阵列)上实现串口与链路口联合通信的方法;首先阐述了串口通信和链路口通信的基本原理,然后介绍了FPGA平台的硬件组成,重点对实现联合通信的各部分模块进行了说明;整个系统结构采用模块化设计,适用于自顶向下的设计方法;最后,在QuartusⅡ8.1平台上运用VWF(矢量波形文件)对各部分模块以及整个联合通信系统进行了仿真,其中"接收数据"由人工设定,观察到的"发送数据"与其一致,验证了设计的正确性和可靠性;该方法已成功应用于图像跟踪系统中。
[Abstract]:According to the communication requirement of an image tracking system, a method of realizing the joint communication between serial port and chain intersection on FPGA (Field Programmable Gate Array) is presented. Then, the hardware composition of FPGA platform is introduced, and the modules to realize joint communication are emphasized. The whole system structure is designed by modularization, which is suitable for top-down design. Finally, The VWF (Vector Waveform File) is used to simulate each module and the whole joint communication system on the platform of Quartus 鈪，

本文编号：1583547