光纤分配网远程施工系统的设计与实现

发布时间：2018-06-16 05:59

本文选题：光纤分配网 + 电子施工　；参考：《制造业自动化》2014年23期

【摘要】：在传统的光纤分配网(ODN)中,施工人员采用纸质工单进行施工,施工效率和正确率低,光纤设备资源浪费严重。为了解决此类问题,设计并实现了一种ODN远程施工系统。论文首先介绍了该系统的设计方案以及工作原理,然后介绍了系统的硬件设计与软件开发实现。论文重点阐述了系统硬件中蓝牙通信模块和单片机控制器的设计与开发,以及系统软件中服务器工单子系统和移动施工客户端程序的设计与实现。使用该系统时,施工人员利用移动施工客户端通过网络以Web Service方式从工单子系统获得施工命令,然后通过蓝牙通信模块将施工命令转发给施工设备上单片机控制器,从而实现对光缆交接箱的施工控制。实际测试结果表明,使用该系统得到的电子施工结果正确,可以有效提升运营商对于ODN资源的管理效率。
[Abstract]:In the traditional optical fiber distribution network (ODN), the construction personnel use paper work order to carry on the construction, the construction efficiency and the correct rate are low, the optical fiber equipment resources are wasted seriously. In order to solve this problem, an ODN remote construction system is designed and implemented. This paper first introduces the design scheme and working principle of the system, then introduces the hardware design and software development of the system. This paper focuses on the design and development of Bluetooth communication module and MCU controller in the system hardware, as well as the design and implementation of server worksheet subsystem and mobile construction client program in the system software. When using the system, the constructors use mobile construction client to obtain the construction command from the work order subsystem by Web Service through the network, and then transmit the construction command to the single-chip microcomputer controller on the construction equipment through Bluetooth communication module. Thus, the construction control of optical cable transfer box is realized. The actual test results show that the electronic construction results obtained by using the system are correct and can effectively improve the efficiency of operators' management of ODN resources.
【作者单位】：华东理工大学信息科学与工程学院;万马电子医疗有限公司;
【基金】：国家自然科学基金(61173048,61300041) 中央高校基本科研业务费专项基金(WH1314038) 高等学校博士学科点专项科研基金(20130074110015)
【分类号】：TN929.11

【参考文献】