当前位置:主页 > 科技论文 > 物理论文 >

变形镜的结构参数对其疲劳寿命的影响

发布时间:2018-05-02 03:18

  本文选题:自适应光学 + 变形镜 ; 参考:《光学学报》2017年10期


【摘要】:在自适应波前校正过程中,变形镜(DM)受驱动器循环机械驱动作用会产生疲劳累积损伤。利用DM的影响函数和最小二乘法对波前校正过程进行模拟,采用有限元方法分析了DM在波前校正过程中的应力分布,并结合Miner疲劳累积损伤理论,计算了DM的疲劳寿命。在此基础上,重点讨论了DM结构参数对影响函数和DM疲劳寿命的影响。研究结果表明,对于给定的畸变波前,当DM极头数相同时,极头采用三角形排布方式时DM的交连值最小,疲劳寿命最长;极头采用正方形排布方式时DM的交连值最大,疲劳寿命最短。此外,当极头间距增大时,DM交连值会随之减小,致使DM的疲劳寿命变长。当极头间距相同时,增大极头半径和缩短极头长度会使DM的交连值变小,DM的疲劳寿命也会变短。极头间距变化对DM疲劳寿命的影响程度大于极头半径和长度;当极头间距一定时,不同的排布方式对应的极头数目不同,DM的极头数越多,疲劳寿命就越短。
[Abstract]:In the process of adaptive wavefront correction, the fatigue cumulative damage is caused by driving the deformable mirror (DMM) by the circulatory mechanism of the driver. The influence function of DM and the least square method are used to simulate the process of wavefront correction. The stress distribution of DM in the process of wavefront correction is analyzed by finite element method, and the fatigue life of DM is calculated by combining with Miner fatigue cumulative damage theory. On this basis, the influence of DM structural parameters on the influence function and the fatigue life of DM is discussed. The results show that for the given distorted wavefront, when the number of DM poles is the same, the cross connection value of DM is the smallest and the fatigue life is the longest when the pole head is arranged in a triangular manner, and the cross-connection value of DM is the largest when the pole head is arranged in a square way. The fatigue life is the shortest. In addition, when the distance between the poles increases, the cross-connection value of DM will decrease, and the fatigue life of DM will become longer. When the distance between the poles is the same, the fatigue life of DM will be shortened by increasing the radius of the pole and shortening the length of the pole. The influence of the distance between the poles on the fatigue life of DM is greater than that of the radius and length of the polar head, and when the distance between the poles is fixed, the more the number of poles corresponding to different arrangement modes is, the shorter the fatigue life is.
【作者单位】: 四川大学电子信息学院;
【基金】:科技部创新人才推进计划(2014RA4051) 苏州大学省级重点实验室开放课题(KSJ1404)
【分类号】:O439

【相似文献】

相关期刊论文 前10条

1 周昌玉;疲劳裂纹扩展速率的统计分析及疲劳寿命的概率预测[J];南京化工大学学报(自然科学版);1999年01期

2 韩利红,初业隆,柴伟健,邢修三;一个估算疲劳寿命的解析公式[J];北京理工大学学报;1999年02期

3 刘义伦,张宏;Miner Rule中损伤率对计算疲劳寿命的影响[J];矿冶工程;1998年03期

4 刘娟;赵楚军;;变形镜驱动器位置偏差对低频相位拟合能力的影响[J];强激光与粒子束;2012年05期

5 吴毅,,王英俭,龚知本;变形镜波前校正非线性响应剩余位相方差分析[J];光学学报;1995年08期

6 黄林海;宁禹;杨华峰;饶长辉;姜文汉;;基于变形镜面形的多帧相位反演算法研究[J];光学学报;2009年06期

7 陈新东;郑立功;罗霄;张学军;;校正低阶像差的9点促动变形镜——设计与实验[J];光学学报;2012年03期

8 胡诗杰;许冰;吴健;姜文汉;;双变形镜自适应光学系统像差解耦研究[J];光学学报;2005年12期

9 代万俊;胡东霞;周维;赵军普;张鑫;张];蒋学君;邓武;黄小军;朱启华;;腔镜位置变形镜波前补偿与实验研究[J];中国激光;2009年11期

10 王德恩;代万俊;张军伟;胡东霞;李小群;;方口径压电薄膜变形镜夹持应力控制研究[J];激光与光电子学进展;2012年01期

相关会议论文 前1条

1 陈新东;郑立功;张学军;;一种新型的变形镜促动器排布方式-设计与分析[A];中国光学学会2011年学术大会摘要集[C];2011年

相关重要报纸文章 前1条

1 见习记者 刘耕;投资1亿推动 激光变形镜产业化[N];东莞日报;2012年

相关博士学位论文 前2条

1 尤俊成;宽温度范围对变形镜工作性能的影响研究[D];中国科学院光电技术研究所;2017年

2 孙全;基于PolyMUMPs技术的微机电变形镜的研究[D];国防科学技术大学;2011年

相关硕士学位论文 前3条

1 曹芬;边缘驱动低阶变形镜设计与仿真研究[D];国防科学技术大学;2015年

2 王丹;小像差压电变形镜制造技术研究[D];苏州大学;2011年

3 王德恩;精密位相主动控制技术研究[D];中国工程物理研究院;2011年



本文编号:1832154

资料下载
论文发表

本文链接:https://www.wllwen.com/kejilunwen/wulilw/1832154.html


Copyright(c)文论论文网All Rights Reserved | 网站地图 |

版权申明:资料由用户b8a5d***提供,本站仅收录摘要或目录,作者需要删除请E-mail邮箱bigeng88@qq.com