基于ZigBee无线传感器网络的智能照明系统设计与实现

发布时间：2018-03-05 22:37

  本文选题：智能照明　切入点：传感网络　出处：《现代电子技术》2017年11期 　论文类型：期刊论文

【摘要】：针对当前的照明系统存在智能化程度低、调节能力差的问题,导致能耗较高,提出一种基于Zig Bee无线传感网络的智能照明系统设计方法,根据外面环境中的亮度、能见度、污染物浓度等参数构造智能化控制模型,以照明系统的输出功率为约束条件,引入占空比控制算法,对最佳节能点进行寻优,通过迭代计算,配合传感器节点硬件模块进行智能化调节。以真实模块为例进行测试,设计的系统可以智能化地调节照明系统的工作条件,最大程度的节约能源,达到实用要求。
[Abstract]:In view of the problems of low intelligence and poor adjustment ability in the current lighting system, a design method of intelligent lighting system based on Zig Bee wireless sensor network is proposed, which is based on the brightness and visibility in the outside environment. The intelligent control model is constructed by using pollutant concentration and other parameters. With the output power of lighting system as the constraint condition, the duty cycle control algorithm is introduced to optimize the optimal energy saving point, and the iterative calculation is carried out. Taking the real module as an example, the system can intelligently adjust the working conditions of the lighting system, save energy as much as possible, and meet the practical requirements.
【作者单位】： 燕山大学电气工程学院;河北建材职业技术学院机电工程系;
【基金】：2016年秦皇岛市科技局:基于ZigBee的智能照明系统设计(201602A032)
【分类号】：TN92;TP212.9
，

本文编号：1572235