失调同轴三反消像散系统消彗差补偿
本文选题:成像系统 + 消彗差 ; 参考:《光学学报》2015年10期
【摘要】:三阶彗差是同轴三反消像散(TMA)光学系统镜面失调产生的主要像差之一。使用矢量像差理论分析了同轴TMA光学系统失调后彗差变化特性,给出了次镜和三镜像差偏移矢量的求解方法及公式,并推导了系统次镜和三镜失调导致的彗差增量系数公式,证明了三镜在X-Y平面内偏心产生的彗差可以通过一个固定比例的次镜偏心量完全补偿,提出了次镜对偏心三镜的消彗差补偿条件、次镜和三镜各自的X-Y平面偏心无彗差条件。计算了同轴TMA光学系统中三镜失调的两个例子,在消彗差补偿条件下,经过次镜主动偏心补偿,全视场均值彗差增量仅为未失调前的0.6%和1.9%,证明了消彗差补偿条件的正确性。
[Abstract]:The third order coma is one of the main aberrations caused by the misalignment of the mirror surface of the coaxial three antialiasing astigmatism (TMA) optical system. Based on the theory of vector aberration, the characteristics of coma variation after misalignment of coaxial TMA optical system are analyzed. The method and formula for calculating the offset vector of secondary mirror and three-mirror difference are given, and the formula of increment coefficient of coma caused by misalignment of secondary mirror and three-mirror is deduced. It is proved that the coma caused by eccentricity of three mirrors in X-Y plane can be completely compensated by a fixed proportion of eccentricity of secondary mirror. The condition of compensating for eccentricity of secondary mirror to eccentric three mirror and the condition of eccentricity of secondary mirror and triple mirror are presented. Two examples of three-mirror misalignment in coaxial TMA optical system are calculated. Under the condition of canceling coma compensation and secondary active eccentricity compensation, the increment of mean coma in the whole field of view is only 0.6% and 1.9% of that before unmisalignment, which proves the correctness of the compensation condition for cancelling coma.
【作者单位】: 中国科学院长春光学精密机械与物理研究所;中国科学院大学;
【基金】:国家863计划(863-2-5-1-13B)
【分类号】:TH74
【参考文献】
相关期刊论文 前9条
1 杨晓飞,韩昌元;利用离轴三反镜光学系统确定各镜的装调公差[J];光学技术;2005年02期
2 车驰骋;李英才;樊学武;马臻;胡永明;;基于矢量波像差理论的计算机辅助装调技术研究[J];光子学报;2008年08期
3 钟兴;金光;;超广角短波红外成像光谱仪前置光学系统设计[J];光学学报;2012年10期
4 庞志海;樊学武;陈钦芳;马臻;邹刚毅;;大口径反射镜面形误差对光学系统像差特性的影响[J];光学学报;2013年04期
5 刘春来;黄玮;尚红波;许伟才;杨旺;;高成像质量光学系统的元件旋转补偿[J];光学学报;2013年09期
6 刘剑峰;王慧军;孙德伟;李博;周峰;;大口径光学系统在轨调整补偿能力[J];光学学报;2014年03期
7 陈华;苏东奇;隋永新;章明朝;田伟;杨怀江;张巍;;光刻机投影物镜热像差主动补偿方法研究[J];光学学报;2014年08期
8 朱杨;张新;伍雁雄;曲贺盟;张继真;王灵杰;;离轴反射式空间天文望远系统设计及其杂散光抑制研究[J];光学学报;2014年08期
9 庞志海;樊学武;陈钦芳;马臻;;失调三反消像散光学系统像差特性[J];红外与激光工程;2013年03期
【共引文献】
相关期刊论文 前10条
1 邓泽峰;尹周平;熊有伦;刘辉;;面向倒装设备的飞行视觉系统设计[J];光电工程;2007年07期
2 李俊峰;宣斌;;离轴非球面零位补偿检验的三坐标装调技术[J];电子测量与仪器学报;2013年11期
3 金光;任秉文;钟兴;;畸变对TDI-CCD空间相机的影响分析及抑制方法研究[J];光学学报;2013年10期
4 赵阳;巩岩;;投影物镜小比率模型系统补偿量的选择[J];光学精密工程;2013年12期
5 刘剑峰;王慧军;孙德伟;李博;周峰;;大口径光学系统在轨调整补偿能力[J];光学学报;2014年03期
6 金光;李艳杰;钟兴;任秉文;王长庚;;空间成像与激光通信共口径光学系统设计[J];光学精密工程;2014年08期
7 赵阳;王平;赵磊;刘春来;华洋洋;门树东;;利用失调量向量选择投影物镜小比例模型系统补偿量[J];光学学报;2014年08期
8 薛庆生;;空间大气遥感高光谱成像仪光学系统设计[J];光学学报;2014年08期
9 何煦;吴国栋;;提高平行光管分划板装调精度新方法研究[J];光学学报;2014年09期
10 王学亮;李佩s,
本文编号:1870025
本文链接:https://www.wllwen.com/kejilunwen/yiqiyibiao/1870025.html