熏蒸治疗设备的设计与开发

发布时间：2018-05-31 17:11

本文选题：熏蒸汽浴治疗 + 人机工程学　；参考：《大连交通大学》2015年硕士论文

【摘要】：随着社会的不断发展人们生活水平逐步提高,人们对自身的健康保健越来越重视,对生活的质量提出了更高的要求。诸如长期面对电脑工作造成的肩部、颈部、腰部疼痛、皮肤质量较差等一系列病症已经成为目前待解决的主要问题。熏蒸汽浴疗法可以促进人体的新陈代谢、加快局部血液循环、缓解病痛与压力,具有保健、治疗等功效。本文以人机工程学为设计基础,并考虑到各类接受熏蒸治疗人群身体尺寸的特点,首先,根据人体结构尺寸完成了熏蒸治疗设备主体结构的方案设计,并在CATIA环境中进行了各部分的实体建模;并且利用CATIA软件中的DMU虚拟样机模块,对熏蒸床体背部辅助升降模块进行仿真。然后将CATIA中建好的模型导入到ANSYS Workbench软件中进行网格的划分,并且通过ANSYS Workbench软件中的DE模块对熏蒸舱体模型网格划分精度进行了数值优化实验,确定流场数值仿真的稳定性。又通过FLUENT流场分析软件对熏蒸舱内部进行不同工况的温度场与速度场分析,借助每次工况下不同变量的设定逐渐优化熏蒸舱室内部的温度场与速度场分布。最后,对熏蒸治疗设备的控制方案进行了详细的分析,确定其控制要求,合理选用控制电路组件,并根据所绘制的电路原理图设计系统程序流程图。
[Abstract]:With the development of society, people pay more and more attention to their own health care and put forward higher demands on the quality of life. A series of diseases, such as shoulder, neck, waist pain and poor skin quality caused by computer work for a long time, have become the main problems to be solved. Fumigation steam bath therapy can promote metabolism, accelerate local blood circulation, relieve pain and pressure, and have health care and treatment effects. Based on the ergonomics design, and considering the characteristics of the body size of all kinds of fumigation people, firstly, according to the size of human body structure, the scheme design of the main structure of fumigation treatment equipment is completed. The entity modeling of each part is carried out in the CATIA environment, and the simulation of the auxiliary lifting module of the fumigation bed body back is carried out by using the DMU virtual prototype module in the CATIA software. The temperature field and velocity field of fumigation cabin were analyzed by FLUENT flow field analysis software under different working conditions, and the distribution of temperature field and velocity field in fumigation cabin was gradually optimized by setting different variables under each working condition. Finally, the control scheme of fumigation treatment equipment is analyzed in detail, the control requirements are determined, the control circuit components are reasonably selected, and the system program flow chart is designed according to the drawn circuit schematic diagram.
【学位授予单位】：大连交通大学
【学位级别】：硕士
【学位授予年份】：2015
【分类号】：TH789

【相似文献】