考虑机器速度的低碳柔性作业车间调度问题研究

发布时间：2018-05-08 09:50

本文选题：低碳 + 加工速度　；参考：《计算机应用研究》2017年04期

【摘要】：根据具有低碳需求的制造企业的实际情况,建立了考虑机器速度的低碳柔性作业车间调度问题模型。该模型考虑机器加工速度,增加了工件的装夹和卸载时间及机器在不同状态下的碳排放参数,使问题更具现实性。为了实现低碳生产的目标,在实现最大完工时间最小的前提下提出了一种非关键工序调整法,通过对非关键工序的调整,降低机器的总碳排放量,提高机器利用率。最后通过求解实际案例,实验结果证实该模型的可行性和非关键工序调整法的有效性。
[Abstract]:According to the actual situation of the manufacturing enterprises with low carbon demand, a low carbon flexible job shop scheduling problem considering machine speed is established. This model takes into account the machining speed, increases the clamping and unloading time of the workpiece and the carbon emission parameters of the machine in different states, so that the problem is more realistic. In order to achieve low carbon production, the model is more realistic. In order to minimize the maximum completion time, a non critical process adjustment method is proposed. By adjusting the non critical processes, the total carbon emission of the machine is reduced and the utilization rate of the machine is improved. Finally, the feasibility of the model and the effectiveness of the non critical process adjustment method are proved by the actual case.

【作者单位】：郑州航空工业管理学院管理工程学院;
【基金】：国家自然科学基金资助项目(61203179) 航空科学基金资助项目(2014ZG55016) 河南省高校科技创新人才支持计划资助项目(14HASTIT006) 河南省高等学校重点科研项目(16A460025)
【分类号】：TP18;TB497

【相似文献】