制造业产品国内增加值、全球价值链长度与上游度——基于不同贸易方式的视角

发布时间：2018-04-11 22:18

本文选题：贸易方式 + 国内增加值比例　；参考：《国际贸易问题》2017年06期

【摘要】：通过区分不同贸易方式,利用OECD国家(地区)间投入产出表,本文研究结果表明:中国制造业部门国内使用产品的国内增加值比例最高,其次是非加工贸易出口产品,加工贸易出口产品的国内增加值比例最低。1995-2011年国内使用产品和非加工贸易出口产品的国内增加值比例呈现下降趋势,而加工贸易出口产品的国内增加值比例得到提升;国内使用产品的全球价值链长度明显大于加工贸易出口产品和非加工贸易出口产品的全球价值链长度,非加工贸易出口产品的全球价值链长度要大于加工贸易出口产品。1995-2011年间各种贸易方式下的制造业部门产品的全球价值链长度都呈延长趋势;制造业部门国内使用产品的上游度水平最高,其次为非加工贸易出口产品,加工贸易出口产品的上游度水平最低。1995-2011年各种贸易方式下的制造业部门产品的上游度水平都有所提升。
[Abstract]:By distinguishing different trade modes and using input-output tables among OECD countries (regions), the results show that the proportion of domestic value added of domestic products used in China's manufacturing sector is the highest, followed by non-processed trade exports.The proportion of domestic added value of processed trade export products is the lowest. The proportion of domestic value added of domestic used products and non-processed trade export products shows a downward trend in 1995-2011, while the proportion of domestic added value of processed trade export products has been increased.The global value chain length of domestic products is significantly larger than that of processed trade exports and non-processed trade exports.The global value chain length of non-processed trade export products is larger than that of processed trade export products.The manufacturing sector has the highest upstream level of products used domestically, followed by non-processed trade exports,The upstream level of processed trade exports is the lowest. The upstream level of manufacturing sector products under various trade modes has increased from 1995 to 2011.
【作者单位】：山东科技大学经济管理学院;商务部国际贸易经济合作研究院;
【基金】：全国统计科学研究重点项目“基于世界投入产出表的中国制造业全球价值链长度统计指标研究”(2016LZ01) 青岛市软科学项目“青岛市战略性新兴产业发展的全面创新驱动机制、模式及实现路径”(15-9-2-1-(30)-zhc)
【分类号】：F424

【参考文献】