近20年五大会展经济带会展建筑设计平面量化研究
[Abstract]:Since China joined the WTO in 1995, international trade has promoted China to welcome a good opportunity for the development of exhibition. In 2002, the construction and successful operation of Guangzhou International Convention and Exhibition Center provided good construction experience for domestic convention and exhibition. Opened the milestone of exhibition design. Is also in 2002, the domestic began to set off a building upsurge. In the past 20 years, the development of the exhibition building, the domestic five exhibition economic belt began to appear large, super-high-level exhibition building. However, due to the lack of experience in the design of convention and exhibition buildings in China, the imperfections of the design specifications of domestic exhibition buildings and the differences of regional conditions, the design and construction of these exhibition buildings are very different. Under the condition that the national convention and exhibition design standard is not clear, this article carries on the arrangement and discussion to the representative exhibition building in 13 cities of the five big exhibition economy belt, the intention is to provide the complete research for our country's large and super large exhibition building. Detailed technical information. After the detailed discussion of 13 exhibition buildings, the common indexes of each function of 13 convention and exhibition buildings are calculated by using the statistical method of the quantitative analysis of plane statistics and the analysis of function indexes. Finally, the structure network diagram of the function index of convention and exhibition building is obtained systematically by summarizing the common indexes. As the conclusion of this paper, the function index structure network diagram is intended to provide strategic index control for the design of convention and exhibition buildings, and then to provide an index reference for the compilation of the specifications for the design of convention and exhibition buildings in our country.
【学位授予单位】:华侨大学
【学位级别】:硕士
【学位授予年份】:2017
【分类号】:TU242.5
【参考文献】
中国期刊全文数据库 前10条
1 王玉;;广州琶洲国际会展中心区规划构建思路与策略[J];规划师;2014年06期
2 范峰;王兆勋;王化杰;钱宏亮;徐义明;刘世豪;张甫平;;杭州国际博览中心飘带网架结构分块吊装分析[J];建筑结构学报;2014年S1期
3 庄学臻;;厦门国际会展中心二期张弦梁结构应用与实践[J];福建建设科技;2014年01期
4 卫东;周文源;周忠发;位立强;单瑞增;黄橙;张徐;朱忠义;秦凯;;重庆国际博览中心结构设计中的关键技术[J];建筑结构;2013年17期
5 朱贝芬;;展位设计的模块化创新思路[J];科技创新导报;2012年34期
6 马洪步;沈莉;张燕平;齐五辉;朱忠义徐;斌;李国强;柳颖秋;张琳;杨育臣;;杭州国际博览中心结构初步设计[J];建筑结构;2011年09期
7 何军;;论我国绿色会展设计的实现途径[J];人民论坛;2011年05期
8 房毅;;浅谈我国会展经济与城市发展的关系[J];陇东学院学报;2010年04期
9 邬燕;;会展设计行业存在的问题与对策[J];企业经济;2008年07期
10 熊涛涛;张小纲;孙翌伦;;提倡可循环展览装修 构建可持续展览形象[J];中国集体经济;2008年12期
中国重要会议论文全文数据库 前2条
1 朱宝良;蒋国明;;南京国际博览中心二期钢结构张弦平梁张拉施工技术[A];'2014中国钢结构行业大会论文集[C];2014年
2 周忠发;秦凯;朱忠义;卫东;周文源;;重庆国际博览中心展馆区屋盖结构设计[A];第十四届空间结构学术会议论文集[C];2012年
中国硕士学位论文全文数据库 前9条
1 王杨;国际博览中心会展管理系统的分析与设计[D];厦门大学;2014年
2 叶静;会展设计的生存状态研究[D];山东轻工业学院;2012年
3 李慧;基于量化分析辅助的低碳建筑设计研究[D];哈尔滨工业大学;2011年
4 管欣欣;德国会展主办模式案例研究[D];兰州大学;2011年
5 王大鹏;关于现代会展设计趋势的研究[D];辽宁师范大学;2010年
6 任晓杰;轻结构展览空间的设计研究[D];东华大学;2007年
7 陈君俊;会展经济研究[D];湖南师范大学;2007年
8 陈奕;当代展示空间设计研究[D];同济大学;2006年
9 黄撰;欧洲会展经济研究[D];吉林大学;2004年
,本文编号:2407463
本文链接:https://www.wllwen.com/jianzhugongchenglunwen/2407463.html