当前位置:主页 > 科技论文 > 建筑工程论文 >

某水池造流系统两相流与稳态数值模拟对比研究

发布时间:2019-02-28 11:10
【摘要】:以实际水池造流系统为例,采用两相流瞬态模拟对水池内的速度场进行了模拟,并将结果与单相流的简化模型进行了对比。结果表明:无滑移壁面和无剪切力壁面两种方法的模拟结果较其使用两相流方法分别小10.8%和5.7%。另外,水池中的流态发展将会产生漩涡,并影响出流的角度,而这一过程需要一定时间才能达到动态平衡。
[Abstract]:Taking the actual pool flow system as an example, the velocity field in the pool is simulated by the transient simulation of two-phase flow, and the results are compared with the simplified model of the single-phase flow. The results show that the simulation results of non-slip wall and shear-free wall are 10.8% and 5.7% less than those of the two-phase flow method, respectively. In addition, the development of the flow pattern in the pool will produce whirlpool and affect the angle of the outflow, and this process will take a certain time to achieve the dynamic equilibrium.
【作者单位】: 中船第九设计研究院工程有限公司;西安航天动力研究所;
【分类号】:TU991.343

【相似文献】

相关期刊论文 前2条

1 冯淳;;计算流体力学在制冷空调中的应用研究[J];无线互联科技;2013年11期

2 刘增辉;赵轶文;;Fluent软件特点及在室内温度计算中的应用[J];电子技术应用;2011年07期

相关会议论文 前1条

1 骆舒凝;李红;王芬娟;;计算流体力学在复杂建筑物四周风场研究中的应用[A];第四届中国CAE工程分析技术年会论文集[C];2008年



本文编号:2431755

资料下载
论文发表

本文链接:https://www.wllwen.com/jianzhugongchenglunwen/2431755.html


Copyright(c)文论论文网All Rights Reserved | 网站地图 |

版权申明:资料由用户8b25e***提供,本站仅收录摘要或目录,作者需要删除请E-mail邮箱bigeng88@qq.com