贵阳某制药厂仓库自动喷水灭火系统设计探讨

发布时间：2018-03-03 11:29

  本文选题：自动喷水灭火系统　切入点：设计流量　出处：《给水排水》2017年02期 　论文类型：期刊论文

【摘要】：在多数民用建筑设计时,对自动喷水灭火系统的设计流量往往根据受保护区域所需的喷水强度采用作用面积法进行估算,而实际上设计流量同喷头的布置间距、最不利喷头的工作压力、喷头的流量系数、系统的管径均有关联,这个关联度在仓库危险级Ⅱ级时尤为突出。以贵阳市南明区制药厂工程为例,精确计算了仓库危险级Ⅱ级的自动喷水灭火系统的设计流量,复核了最不利作用面的工作压力。
[Abstract]:In the design of most civil buildings, the design flow rate of the automatic sprinkler system is usually estimated by using the action area method according to the sprinkler intensity needed in the protected area, but in fact, the distance between the design flow rate and the sprinkler arrangement, The working pressure of the most unfavorable nozzle, the flow coefficient of the nozzle, and the pipe diameter of the system are all related, and this correlation degree is especially prominent when the warehouse is in danger class 鈪，

本文编号：1560857