煤矿安全监控系统及组成设备抗干扰设计

发布时间：2018-06-18 06:06

  本文选题：煤矿安全监控系统 + 升级改造　； 参考：《工矿自动化》2017年06期

【摘要】：针对现有煤矿安全监控系统及组成设备抗干扰能力较差的问题,根据国家煤矿安全监察局对煤矿安全监控系统升级改造提出的"增强系统及组成设备的抗电磁干扰能力"的要求,从设备机械结构设计、硬件电路设计、软件设计等方面阐述如何提高目前安全监控系统及组成设备的抗干扰能力。实际应用结果表明,采用本文所述抗干扰设计的设备可通过3级静电放电抗扰度试验、2级射频电磁场辐射抗扰度试验等试验项目。
[Abstract]:Aiming at the problem of poor anti-interference ability of existing coal mine safety monitoring system and component equipment, According to the requirements of the State Administration of Coal Mine Safety Supervision for the upgrading and upgrading of the coal mine safety monitoring system, the requirements of "enhancing the ability of the system and its components to resist electromagnetic interference" are discussed, including the design of the mechanical structure of the equipment, the design of the hardware circuit, How to improve the anti-interference ability of the current security monitoring system and its components is described in software design. The practical application results show that the equipment designed in this paper can be tested by the three-stage electrostatic discharge immunity test and the second-stage radio-frequency electromagnetic field radiation immunity test.
【作者单位】： 中煤科工集团常州研究院有限公司;
【基金】：国家安全生产监督管理总局矿用新装备新材料安全准入分析验证中心实验室建设项目(发改投资[2014]744-010)
【分类号】：TD76
，

本文编号：2034454