基于ZigBee技术的矿井通风参数测试技术研究与应用设计
发布时间：2018-07-14 20:33
【摘要】：本文针对传统的通风阻力测量方法的不足，首次提出并设计了一种基于无线通信技术并将现代测量技术、传感技术和嵌入式技术相结合的无线通信矿用通风多参数测定仪器，通过一组仪器同时测量一段巷道内相距一定距离的两点的温湿度和气压，，并在一个主仪器上同时显示。 本文详细介绍并分析了基于ZigBee无线通信技术的矿井通风多参数测定仪的硬件和软件的设计原理和实现方法，核心控制处理器件采用了集51单片机和RF射频技术于一体的ZigBee芯片CC2530，温湿度采集器件采用SHT10，通过MAX232实现与PC机的数据通信。软件方面的通信模式采用Z-tack协议栈，以C程序语言为基础编写控制与处理程序。
[Abstract]:Aiming at the shortage of traditional ventilation resistance measurement method, this paper presents and designs a wireless communication mine ventilation multi-parameter measuring instrument based on wireless communication technology and combining modern measurement technology, sensor technology and embedded technology. The temperature, humidity and air pressure of two points in a certain distance are measured simultaneously by a group of instruments and displayed on a main instrument at the same time. This paper introduces and analyzes the design principle and realization method of hardware and software of mine ventilation multi-parameter measuring instrument based on ZigBee wireless communication technology. The core control device adopts ZigBee chip CC2530 which integrates 51 single chip computer and RF radio frequency technology, and SHT10 for temperature and humidity collector, and realizes data communication with PC through MAX232. The communication mode of software is Z-tack protocol stack, and the control and processing program is written on the basis of C program language.
【学位授予单位】：辽宁工程技术大学
【学位级别】：硕士
【学位授予年份】：2013
【分类号】：TD724
本文编号：2122868
[Abstract]:Aiming at the shortage of traditional ventilation resistance measurement method, this paper presents and designs a wireless communication mine ventilation multi-parameter measuring instrument based on wireless communication technology and combining modern measurement technology, sensor technology and embedded technology. The temperature, humidity and air pressure of two points in a certain distance are measured simultaneously by a group of instruments and displayed on a main instrument at the same time. This paper introduces and analyzes the design principle and realization method of hardware and software of mine ventilation multi-parameter measuring instrument based on ZigBee wireless communication technology. The core control device adopts ZigBee chip CC2530 which integrates 51 single chip computer and RF radio frequency technology, and SHT10 for temperature and humidity collector, and realizes data communication with PC through MAX232. The communication mode of software is Z-tack protocol stack, and the control and processing program is written on the basis of C program language.
【学位授予单位】：辽宁工程技术大学
【学位级别】：硕士
【学位授予年份】：2013
【分类号】：TD724
【参考文献】
相关期刊论文 前10条
1 赵佐平;施惠昌;田金鹏;蒋敏;;基于CC2420的井下无线定位方案设计与研究[J];传感器与微系统;2008年02期
2 王俊彩;王福平;侯瑞峰;王成;;基于BMP085的一种便携式海拔高度测量系统设计[J];传感器与微系统;2011年12期
3 雷巍;郑丽娅;赖文娟;;基于DS1302的时钟接口设计[J];四川兵工学报;2011年11期
4 杨文铂;尤一鸣;;基于MC13192的Zigbee无线数传模块设计[J];单片机与嵌入式系统应用;2008年01期
5 吴国宏;;新型温湿度传感器SHT10的原理及应用[J];单片机与嵌入式系统应用;2009年04期
6 李志方;钟洪声;;IEEE802.15.4的CC2530无线数据收发设计[J];单片机与嵌入式系统应用;2011年07期
7 王玮;樊则宾;;基于CC2430的无线温度检测终端的设计[J];电子工程师;2007年08期
8 王树刚,刘树存;气压计基点法测矿井通风阻力的分析[J];煤炭工程师;1997年06期
9 刘殿武;利用风门测量巷道通风阻力[J];矿业安全与环保;2004年05期
10 周述峰;陶干强;曹伟;宋丽霞;;基于运筹学的矿山通风系统分析[J];金属矿山;2008年10期
本文编号：2122868
本文链接：https://www.wllwen.com/kejilunwen/anquangongcheng/2122868.html
