风险因素交互耦合下机加工车间安全评估

发布时间：2019-05-19 13:02

【摘要】：为了评价风险因子耦合作用下的机加工车间安全状况,构建了一种基于协调耦合理论的机加工车间安全评价模型。首先,从人员因子、设备因子、环境因子和管理因子4个维度要素分析机加工车间风险因子间的耦合作用机理;基于此,建立机加工车间安全评价指标体系;然后,构建耦合协调模型对多因素交互耦合下的机加工车间安全状况进行评价;最后,以安徽省某汽车机加工车间为例,对所建立的模型进行验证。结果表明,管理因子和人员因子对机加工车间的整体安全水平贡献最大,同时,车间整体安全状况良好,评价结果与实际情况基本相一致。
[Abstract]:In order to evaluate the safety of machining workshop under the coupling of risk factors, a safety evaluation model of machining workshop based on coordinated coupling theory is constructed. Firstly, the coupling mechanism of risk factors in machining workshop is analyzed from four dimensional factors: personnel factor, equipment factor, environmental factor and management factor, and based on this, the safety evaluation index system of machining workshop is established. Then, the coupling coordination model is constructed to evaluate the safety of the machining workshop under the multi-factor interactive coupling. Finally, taking an automobile machining workshop in Anhui Province as an example, the established model is verified. The results show that the management factor and personnel factor contribute the most to the overall safety level of the machining workshop. At the same time, the overall safety condition of the workshop is good, and the evaluation results are basically consistent with the actual situation.
【作者单位】：安徽科技学院管理学院;中国矿业大学矿业学院;
【基金】：安徽省教育厅人文社科重大项目(SK2014ZD022) 安徽科技学院人才引进项目(SRC2014400,SRC2014402)
【分类号】：TH188

【参考文献】