连续纤维增强金属基复合材料研究进展及其激光熔覆
发布时间:2018-04-25 00:30
本文选题:激光技术 + 金属基复合材料 ; 参考:《激光与光电子学进展》2017年06期
【摘要】:对连续纤维增强铝基、镁基和钛基复合材料的制备方法、微结构与性能进行了综述,指出了存在的问题,提出了激光熔覆纤维增强金属基复合材料的新方法,即将纤维预置包埋在合金粉末中,然后进行快速激光熔覆。该方法能精确控制过程参数,大幅减少制备时间,可获得性能优异的复合材料。
[Abstract]:The preparation methods, microstructure and properties of continuous fiber reinforced aluminum, magnesium and titanium matrix composites are reviewed. The existing problems are pointed out, and a new method of laser cladding fiber reinforced metal matrix composites is proposed. The fiber is embedded in the alloy powder, and then laser cladding is carried out. This method can accurately control the process parameters, greatly reduce the preparation time, and obtain composites with excellent properties.
【作者单位】: 天津工业大学激光技术研究所;天津工业大学纺织学院;
【基金】:国家自然科学基金(61475117,50901040) 天津市应用基础及前沿技术研究计划(12JCQNJC02800) 天津市科技支撑重大专项(13ZCZDGX01109) 江西省杰出青年人才基金(20162BCB23039)
【分类号】:TB33
【参考文献】
相关期刊论文 前9条
1 李佩桓;张勇;王涛;张亚洲;李钊;贾崇林;曲选辉;;连续SiC纤维增强金属基复合材料研究进展[J];材料工程;2016年08期
2 罗贤;李超;杨延清;许海Z,
本文编号:1798974
本文链接:https://www.wllwen.com/kejilunwen/cailiaohuaxuelunwen/1798974.html
最近更新
教材专著