机械合金化法制备Cu基复合材料的工艺与性能研究
发布时间：2018-07-20 09:31
【摘要】：采用机械合金化法制备了Cu基复合材料,研究了球磨时间、压制压强、烧结温度和烧结时间对复合材料粉末粒度、抗弯强度和电阻系数的影响。结果表明,Cu基复合材料的最佳制备工艺为:球磨时间40 h,压制压强400 MPa,烧结温度900℃和烧结时间为2.5 h,此时Cu基复合材料可以取得最佳的抗弯强度和电阻系数。
[Abstract]:The effects of milling time, pressing pressure, sintering temperature and sintering time on the particle size, bending strength and resistance coefficient of Cu matrix composites were studied. The results show that the optimum preparation process of Cu matrix composites is as follows: milling time 40 h, pressing pressure 400 MPA, sintering temperature 900 鈩，
本文编号：2133111
[Abstract]:The effects of milling time, pressing pressure, sintering temperature and sintering time on the particle size, bending strength and resistance coefficient of Cu matrix composites were studied. The results show that the optimum preparation process of Cu matrix composites is as follows: milling time 40 h, pressing pressure 400 MPA, sintering temperature 900 鈩，
本文编号：2133111
本文链接：https://www.wllwen.com/kejilunwen/cailiaohuaxuelunwen/2133111.html
