高规格球形钛合金粉末成功研发
发布时间：2019-06-03 02:00
【摘要】：正"3D打印的原材料需要从加拿大购买,每公斤售价8 000元,我们的研发成果推出后,他们主动将价格降到每公斤3 000元。"11月9日,西安交通大学青岛研究院先进制造粉体研究中心主任宋晓平自豪地告诉记者。宋晓平所说的研发成果,就是作为3D打印关键原材料的高规格球形钛合金粉末。在位于青岛胶州的西安交大青岛研究院先进制造粉体研究中心,记者见到了生产高规格球形钛合金粉末的设备。这台设备直径近10 m,呈圆盘式,
[Abstract]:"the raw materials for 3D printing need to be purchased from Canada at a price of 8,000 yuan per kilogram. After the launch of our R & D results, they took the initiative to reduce the price to 3,000 yuan per kilogram." on November 9, Song Xiaoping, director of the Advanced Manufacturing Powder Research Center of Qingdao Research Institute of Xi'an Jiaotong University, proudly told reporters. Song Xiaoping said that the research and development results are high specification spherical titanium alloy powder as the key raw material for 3D printing. At the Advanced Powder Manufacturing Research Center of Xi'an Jiaotong University Qingdao Research Institute, located in Jiaozhou, Qingdao, the reporter saw the equipment for the production of high-specification spherical titanium alloy powder. The device is nearly 10 m in diameter and is disk-shaped.
【分类号】：TB383.3;TG146.23
本文编号：2491584
[Abstract]:"the raw materials for 3D printing need to be purchased from Canada at a price of 8,000 yuan per kilogram. After the launch of our R & D results, they took the initiative to reduce the price to 3,000 yuan per kilogram." on November 9, Song Xiaoping, director of the Advanced Manufacturing Powder Research Center of Qingdao Research Institute of Xi'an Jiaotong University, proudly told reporters. Song Xiaoping said that the research and development results are high specification spherical titanium alloy powder as the key raw material for 3D printing. At the Advanced Powder Manufacturing Research Center of Xi'an Jiaotong University Qingdao Research Institute, located in Jiaozhou, Qingdao, the reporter saw the equipment for the production of high-specification spherical titanium alloy powder. The device is nearly 10 m in diameter and is disk-shaped.
【分类号】：TB383.3;TG146.23
【相似文献】
相关期刊论文 前10条
1 威尔逊 ,王世杰;钛合金粉末[J];稀有金属合金加工;1975年01期
2 孙洪志;;生产“干净”钛合金粉末的新方法[J];稀有金属合金加工;1980年02期
3 庞美珠;;等离子旋转电极法制取清洁钛合金粉末[J];上海有色金属;1980年06期
4 R.Sundaresan,王世杰;旋转棒法生产钛合金粉末[J];稀有金属材料与工程;1983年06期
5 窦健敏;钛合金粉末生产新工艺[J];稀有金属;1990年06期
6 胡初潜;钛合金粉的快速动态固结[J];稀有金属;1993年03期
7 曾立英;高温下钛合金粉末件的压实性研究[J];稀有金属快报;2002年09期
8 F.H.Froes ,D.Eylon ,廖际常;钛合金粉末冶金[J];稀有金属材料与工程;1986年06期
9 周洪强;陈志强;;钛及钛合金粉末的制备现状[J];稀有金属快报;2005年12期
10 刘学晖,徐广;惰性气体雾化法制取钛和钛合金粉末[J];粉末冶金工业;2000年03期
相关会议论文 前1条
1 郭增强;杨智凤;马琪;;脉冲熔融——红外吸收法测定钛合金粉中氧含量[A];陕西省机械工程学会理化检验分会第九届年会论文集[C];2013年
相关重要报纸文章 前1条
1 吴明;低氧钛合金粉末项目启动[N];中国物资报;2000年
，本文编号：2491584
本文链接：https://www.wllwen.com/kejilunwen/cailiaohuaxuelunwen/2491584.html
