无线电能充电器的设计与实现
发布时间：2019-06-06 09:11
【摘要】：无线充电技术早在上世纪末期就出现了,利用电磁感应原理,和相关电磁技术,通过L1、L2两个线圈实现电磁耦合,以达到无介质传输电能,打破了用电器与电源直接连接的传统,降低了用电器的使用风险和成本。实现无线充电达到高效率能量传输便携带充电系统是个很值得研究的方向。
[Abstract]:Wireless charging technology appeared as early as the end of the last century. Using the principle of electromagnetic induction and related electromagnetic technology, the electromagnetic coupling is realized through L _ 1 and L _ 2 coils in order to transmit electric energy without dielectric. It breaks the tradition of direct connection between electrical appliances and power supply, and reduces the use risk and cost of electrical appliances. It is a worthy research direction to realize wireless charging to achieve high efficiency energy transmission and carry charging system.
【作者单位】： 西安翻译学院电子工程系;
【分类号】：TM724;TM910.6
本文编号：2494242
[Abstract]:Wireless charging technology appeared as early as the end of the last century. Using the principle of electromagnetic induction and related electromagnetic technology, the electromagnetic coupling is realized through L _ 1 and L _ 2 coils in order to transmit electric energy without dielectric. It breaks the tradition of direct connection between electrical appliances and power supply, and reduces the use risk and cost of electrical appliances. It is a worthy research direction to realize wireless charging to achieve high efficiency energy transmission and carry charging system.
【作者单位】： 西安翻译学院电子工程系;
【分类号】：TM724;TM910.6
【相似文献】
相关期刊论文 前1条
1 蒋维;傅文珍;王蕊玲;刘婷;;一种小功率的谐振耦合电能无线传输系统仿真[J];嘉兴学院学报;2012年03期
，本文编号：2494242
本文链接：https://www.wllwen.com/kejilunwen/dianlidianqilunwen/2494242.html
