基于CRY711的多单元仿真耳机设计
发布时间：2018-11-20 19:00
【摘要】：本文通过控制变量的方式探究导管、阻尼滤网、分频电路等因素对于动铁单元声音的影响,得出多单元动铁耳机分频与调音的原理,并以此为基础经过多次反复试验,使用较低成本的动铁单元设计出了一套三频均衡,适合演绎流行乐的调音方案。
[Abstract]:In this paper, the influence of duct, damping filter, frequency dividing circuit on the sound of moving iron element is studied by controlling variables, and the principle of frequency division and tuning of multi-unit moving iron headset is obtained, and on the basis of this, the principle of frequency division and tuning of multi-unit moving iron headset is obtained, and on this basis, many repeated experiments are carried out. A three-frequency equalization scheme suitable for deducing pop music is designed by using low-cost moveable iron element.
【作者单位】： 北京林业大学工学院;
【分类号】：TN642
，
本文编号：2345709
[Abstract]:In this paper, the influence of duct, damping filter, frequency dividing circuit on the sound of moving iron element is studied by controlling variables, and the principle of frequency division and tuning of multi-unit moving iron headset is obtained, and on the basis of this, the principle of frequency division and tuning of multi-unit moving iron headset is obtained, and on this basis, many repeated experiments are carried out. A three-frequency equalization scheme suitable for deducing pop music is designed by using low-cost moveable iron element.
【作者单位】： 北京林业大学工学院;
【分类号】：TN642
，
本文编号：2345709
本文链接：https://www.wllwen.com/kejilunwen/dianzigongchenglunwen/2345709.html
