C-band fundamental/first-order mode converter based on multi
发布时间:2024-07-09 04:50
The design,fabrication and characterization of a fundamental/first-order mode converter based on multimode interference coupler on InP substrate were reported.Detailed optimization of the device parameters were investigated using 3D beam propagation method.In the experiments,the fabricated mode converter realized mode conversion from the fundamental mode to the first-order mode in the wavelength range of 1530-1565 nm with excess loss less than 3 dB.Moreover,LP01 and LP11 fi...
【文章页数】:5 页
【文章目录】:
1. Introduction
2. Principal of mode conversion
3. Device design and simulation
4. Device fabrication and experimental results
5. Conclusion
本文编号:4004421
【文章页数】:5 页
【文章目录】:
1. Introduction
2. Principal of mode conversion
3. Device design and simulation
4. Device fabrication and experimental results
5. Conclusion
本文编号:4004421
本文链接:https://www.wllwen.com/kejilunwen/dianzigongchenglunwen/4004421.html
上一篇:单层钼基硫族化合物及其异质结的制备和光电性能研究
下一篇:没有了
下一篇:没有了