注射成型精密陶瓷结构件两步脱脂工艺研究
发布时间：2018-10-17 19:30
【摘要】：脱脂过程是注射成型工艺中关键步骤,生产过程中常常因为脱脂过程控制不当,引发坯体产生变形、微裂纹、致密度低等问题,并且常规热脱脂耗时较长,严重影响生产效率,增加生产成本。针对上述问题,通过采用溶剂脱脂和热脱脂相结合的两步脱脂工艺,研究了脱脂溶剂和脱脂温度对溶剂脱脂效率的影响,以及两步脱脂相结合对生产效率和坯体质量的影响,实验证明采用在60℃汽油脱脂1 h后进行热脱脂的两步脱脂工艺可以有效避免坯体变形、微裂纹、不致密等缺陷,并且可以将脱脂过程从原来的25 h缩短至8 h,较大的缩短脱脂周期。
[Abstract]:The degreasing process is a key step in the injection molding process. It is often caused by improper control of the degreasing process, resulting in deformation of the billet, microcracks, low density and so on, and the conventional hot degreasing takes a long time, which seriously affects the production efficiency. Increase production costs. Aiming at the above problems, the effects of degreasing solvent and temperature on the efficiency of solvent degreasing, and the effect of the combination of two steps of degreasing on the production efficiency and the mass of the billet were studied by using the two-step degreasing process of solvent degreasing and thermal degreasing. The experimental results show that the two-step degreasing process with thermal degreasing at 60 鈩，
本文编号：2277724
[Abstract]:The degreasing process is a key step in the injection molding process. It is often caused by improper control of the degreasing process, resulting in deformation of the billet, microcracks, low density and so on, and the conventional hot degreasing takes a long time, which seriously affects the production efficiency. Increase production costs. Aiming at the above problems, the effects of degreasing solvent and temperature on the efficiency of solvent degreasing, and the effect of the combination of two steps of degreasing on the production efficiency and the mass of the billet were studied by using the two-step degreasing process of solvent degreasing and thermal degreasing. The experimental results show that the two-step degreasing process with thermal degreasing at 60 鈩，
本文编号：2277724
本文链接：https://www.wllwen.com/kejilunwen/huagong/2277724.html
