Computational analysis of the flow of pseudoplastic power-la

发布时间：2021-11-26 21:18

　　The flow of pseudoplastic power-law fluids with different flow indexes at a microchannel plate was studied using computational fluid dynamic simulation.The velocity distribution along the microchannel plate and especially in the microchannel slits,flow pattern along the outlet arc and the pressure drop through the whole of microchannel plate were investigated at different power-law flow indexes.The results showed that the velocity profile in the microchannel slits for low flow index fluids was s... 

【文章来源】：Chinese Journal of Chemical Engineering. 2017,25(10)EISCICSCD

【文章页数】：9 页

【文章目录】：
1. Introduction
2. Governing Equations
3. Results and Discussion
    3.1. Velocity distribution along the microchannel plate
    3.2. Velocity profile in one microchannel slit
    3.3. Velocity distribution at the outlets
    3.4. Pressure drop
    3.5. Heat transfer
4. Conclusions


【参考文献】：
期刊论文
[1]Optimal design for split-and-recombine-type flow distributors of microreactors based on blockage detection[J]. Lin Wang,Xianzuo Kong,Yongsheng Qi.  Chinese Journal of Chemical Engineering. 2016(07)
[2]Microfluidic technology for multiphase emulsions morphology adjustment and functional materials preparation[J]. Xuehui Ge,Hong Zhao,Tao Wang,Jian Chen,Jianhong Xu,Guangsheng Luo.  Chinese Journal of Chemical Engineering. 2016(06)
[3]Kinetic study on selective extraction of HCl and H3PO4 in a microfluidic device[J]. Fang Zhao,Yangcheng Lu,Kai Wang,Guangsheng Luo.  Chinese Journal of Chemical Engineering. 2016(02)
[4]微通道内表面单孔的空心硅铝复合微球的制备（英文）[J]. 王晋媛,王玉军,骆广生.  Chinese Journal of Chemical Engineering. 2014(Z1)



本文编号：3520940