大中型多辊连轧管机组产品壁厚精度的模拟对比浅析

发布时间：2018-05-15 05:38

  本文选题：有限元仿真 + 多辊连轧　； 参考：《钢铁技术》2016年04期

【摘要】：利用ABAQUS有限元仿真软件对多辊连轧工艺(二辊、三辊和四辊)应用于Φ340机组的轧后荒管壁厚精度进行了多种条件的模拟对比研究,结果表明,与二辊和三辊相比,四辊连轧工艺的产品壁厚均匀性更好。
[Abstract]:ABAQUS finite element simulation software was used to simulate and compare the wall thickness accuracy of waste pipe in 桅 340 mill. The results show that compared with two and three rollers, the method of multi-roll continuous rolling process (two-roll, three-roll and four-roll) has been used to simulate and contrast the wall thickness accuracy of waste pipe after rolling in 桅 340 unit. The results show that, compared with two rollers and three rollers, The product wall thickness uniformity of four-roll continuous rolling process is better.
【作者单位】： 中冶赛迪工程技术股份有限公司钢管事业部;
【分类号】：TG333.8
，

本文编号：1891232