载荷对汽车活塞环表面Ni-W-SiC镀层摩擦性能的影响
发布时间：2018-11-17 06:32
【摘要】：以摩擦因数和摩擦失重量为指标,并参照磨损形貌,研究了载荷对表面镀有Ni-W-SiC镀层的汽车发动机活塞环的摩擦性能的影响。结果表明:随着载荷的增大,摩擦因数降低,而摩擦失重量升高。当载荷为5N时,稳定时摩擦因数约为0.43,摩擦失重量约为1.83 mg;当载荷增至10N和20N时,稳定时摩擦因数分别为0.37和0.32,摩擦失重量分别为2.14mg和2.37mg。载荷变化未影响活塞环表面Ni-W-SiC镀层的摩擦机制。
[Abstract]:The effect of load on the friction performance of the piston ring of automobile engine coated with Ni-W-SiC coating was studied by taking friction coefficient and weight loss as the index and referring to the wear morphology. The results show that the friction coefficient decreases and the friction weight increases with the increase of load. When the load is 5 N, the friction coefficient is about 0.43 and the friction loss weight is about 1.83 mg;. When the load is increased to 10 N and 20 N, the friction coefficient is 0.37 and 0.32, and the friction loss weight is 2.14mg and 2.37 mg respectively. The friction mechanism of Ni-W-SiC coating on piston ring surface was not affected by load change.
【作者单位】： 苏州工业职业技术学院;
【基金】：江苏高校品牌专业建设工程资助项目(PPZY2015B186)
【分类号】：TG174.4
本文编号：2336767
[Abstract]:The effect of load on the friction performance of the piston ring of automobile engine coated with Ni-W-SiC coating was studied by taking friction coefficient and weight loss as the index and referring to the wear morphology. The results show that the friction coefficient decreases and the friction weight increases with the increase of load. When the load is 5 N, the friction coefficient is about 0.43 and the friction loss weight is about 1.83 mg;. When the load is increased to 10 N and 20 N, the friction coefficient is 0.37 and 0.32, and the friction loss weight is 2.14mg and 2.37 mg respectively. The friction mechanism of Ni-W-SiC coating on piston ring surface was not affected by load change.
【作者单位】： 苏州工业职业技术学院;
【基金】：江苏高校品牌专业建设工程资助项目(PPZY2015B186)
【分类号】：TG174.4
【相似文献】
相关期刊论文 前4条
1 郭忠诚,杨显万,刘鸿康,王志英,王敏;SiC微粒对Ni-W-SiC复合镀层工艺及性能的影响[J];化工冶金;1997年02期
2 张际先,桑正中,高良润;土壤对固体材料粘附和摩擦性能的研究[J];农业机械学报;1986年01期
3 朱双霞;周小平;李玉平;黄国兵;;磨削加工表面的摩擦性能分析[J];制造技术与机床;2008年07期
4 ;石棉树脂材料Z64的摩擦性能试验[J];锻压机械;1975年04期
，本文编号：2336767
本文链接：https://www.wllwen.com/kejilunwen/jiagonggongyi/2336767.html
