金属注射成形制备IN713C合金的研究
发布时间：2019-08-12 17:35
【摘要】：为了寻找一种适用于汽油机涡轮增压器高温环境下使用的合金材料,选用IN713C合金作为研究对象,旨在探索最佳的IN713C注射成形工艺参数。对制备样品的密度、微观组织结构和力学性能进行测试和分析,发现850℃是较佳的预烧温度;当烧结温度为1 300℃,保温时间为3 h时,样品密度、硬度和拉伸性能最佳,烧结密度为7.83 g/cm~3,,相对密度为99.0%。
[Abstract]:In order to find an alloy material suitable for use in a high-temperature environment of a gasoline engine turbocharger, the IN713C alloy is used as the research object, and the optimal IN713C injection molding process parameters are explored. The density, microstructure and mechanical properties of the prepared sample were tested and analyzed, and it was found that 850 鈩，
本文编号：2525857
[Abstract]:In order to find an alloy material suitable for use in a high-temperature environment of a gasoline engine turbocharger, the IN713C alloy is used as the research object, and the optimal IN713C injection molding process parameters are explored. The density, microstructure and mechanical properties of the prepared sample were tested and analyzed, and it was found that 850 鈩，
本文编号：2525857
本文链接：https://www.wllwen.com/kejilunwen/jiagonggongyi/2525857.html
