continuous casting semisolid forming model of temperature fi

  本文关键词：连续铸造稳态温度场非物理边界条件的确定，由笔耕文化传播整理发布。

连续铸造稳态温度场非物理边界条件的确定

Non-physical Boundary Condition of Steady Temperature Field in Continuous Casting Process

[1] [2]

ZHOU Zhi-min, LU Gui-min （1. School of Sciences, Northeastern University, Shenyang 110004, China; 2 School of Resources ＆ Environmental Engineering, East China University of Sc

[1]东北大学理学院,辽宁沈阳110004; [2]华东理工大学资源与环境工程学院,上海200237

文章摘要：建立了描述连续铸造过程的温度场模型，用外推法得出凝固金属在结晶器出口侧的非物理边界条件模型，使稳态温度场的计算精确高效．利用该温度场模型及非物理边界条件模型计算了Al-Cu合金在半连续铸造过程中的稳态温度场，，并以此确定的介观温度场作为液固相变模拟的条件，用多尺度计算技术模拟了Al～10％Cu合金在不同浇注温度时的凝固组织，得到了晶粒形貌和分布合理的微观组织．对ZL201合金的近液相线铸造组织的模拟结果与实验吻合．研究表明：该温度场模型及非物理边界条件模型适于稳态连续铸造过程的模拟，并可为金属凝固组织的多尺度模拟提供正确的温度场数据．

Abstr：A model of temperature field was developed to describe the continuous casting process. The model of the non-physical boundary condition of temperature field was also proposed by extrapolation technique for the castings out of the mould to get efficient and accurate calculation results of the steady temperature fields. Then, the steady temperature fields of Al-Cu alloys in semi-continuous casting process were calculated using the given models, and the mesoscale temperature field thus determined was taken as the conditions for the simulation of liquid-solid phase transformation. The calculated temperature fields were applied to the multi-scale simulation of the solidification of the Al-10% Cu alloys at different pouring temperatures, thus obtaining the morphology and reasonably distributed grain structure. It was found that the simulated grain size and morphology of near liquidus cast ZL201 alloy is well consistent with experimental results. All the results show that the models developed for temperature field and non-physical boundary condition are applicable to the simulation of steady continuous casting process, especially they can provide correct data of temperature fields as reference for the multi-scale simulation of solidified metal structure.

文章关键词：

Keyword：:continuous casting semisolid forming model of temperature field boundary condition multi-scale simulation

相关文章：

[1] 异形坯连铸结晶器内钢水流场温度场耦合数值模拟   《太原科技大学学报》  2007年06期
[2] 电磁连铸对镁合金凝固和偏析的影响   《稀有金属材料与工程》  2007年12期
[3] 连铸连轧燃油系统故障率过高原因及对策   《设备管理与维修》  2008年01期
[4] 基于多线程技术的离合器在线检测系统的设计   《兵工自动化》  2007年12期
[5] 低频电磁铸造7050铝合金的组织与性能   《东北大学学报：自然科学版》  2008年01期
[6] 热型连铸固液界面位置和形状的控制分析   《铸造技术》  2008年01期
[7] 提高钢包自开率的工艺实践   《江苏冶金》  2007年06期
[8] 方坯连铸结晶器热力耦合有限元分析   《机械管理开发》  2008年01期
[9] 磁场频率对软接触结晶器内磁感应强度分布的影响   《特种铸造及有色合金》  2008年01期
[10] 铝合金直接水冷半连续铸造控制系统设计及冷却水量自动控制仿真   《中国铸造装备与技术》  2008年01期

课题项目：国家自然科学基金资助项目（50674032）;教育部新世纪优秀人才支持计划项目（NCET-04-0279）.

  本文关键词：连续铸造稳态温度场非物理边界条件的确定，由笔耕文化传播整理发布。