面向定制的桥式起重机快速设计研究与系统开发

发布时间：2018-02-27 08:52

本文关键词： 大规模定制桥式起重机产品族快速设计配置设计　出处：《中北大学》2012年硕士论文　论文类型：学位论文

【摘要】：大规模定制生产已经成为21世纪主流的生产方式，它以大批量生产的效率和成本提供满足客户个性化需求的产品。桥式起重机作为工业生产中最基本的设备，必须提高用户化程度、缩短开发周期，才能提高市场竞争力。论文对大规模定制设计技术进行了分析研究，并结合桥式起重机，开发了面向定制的桥式起重机快速设计系统。论文主要内容如下：（1）介绍了桥式起重机的研究现状以及大规模定制的发展状况，对快速设计技术和方法做了总结，阐述了开发面向定制的桥式起重机快速设计系统的意义；（2）将大规模定制模式下的产品开发流程分为两个阶段：产品族实现和产品定制，并具体分析了两个设计阶段设计的特点，以及大规模定制设计的技术基础；（3）以产品族为设计资源组织形式，对桥式起重机产品族进行了规划，建立了可配置的桥式起重机产品族主结构模型；（4）结合事物特性表和全息建模思想，研究了零件和装配体两种建模方式，并在产品族主模型、主文档基础上，，研究了零件和装配体两个层次的产品变型设计技术；（5）结合实例，采用基于规则和实例推理的二级匹配技术，解决桥式起重机配置设计中产品的匹配问题，并对桥式起重机的定制流程进行了规划；（6）搭建了面向定制的桥式起重机快速设计系统的体系结构，阐述了系统的开发模块、开发技术，并开发了系统，最后阐述了系统C/S/W的工作流程，介绍了系统运行过程。
[Abstract]:In 21th century, mass customization has become the mainstream mode of production. It provides products that meet the individual needs of customers by the efficiency and cost of mass production. Bridge crane is the most basic equipment in industrial production. In order to improve the market competitiveness, we must improve the degree of customization and shorten the development cycle. This paper analyzes and studies the mass customization design technology, and combines with the bridge crane, The rapid design system of bridge crane for customization is developed. The main contents of this paper are as follows:. This paper introduces the research status of bridge crane and the development of mass customization, summarizes the rapid design technology and method, and expounds the significance of developing a custom-oriented rapid design system for bridge crane. 2) the product development process under mass customization mode is divided into two stages: product family realization and product customization, and the characteristics of the two design phases are analyzed in detail, and the technical basis of mass customization design is also analyzed. (3) taking product family as design resource organization form, the product family of bridge crane is planned, and the main structure model of product family of bridge crane is established. (4) based on the concept of object characteristic table and holographic modeling, two modeling methods of part and assembly are studied. Based on the main model and main document of product family, the product variant design technology at two levels of parts and assembly is studied. Combined with examples, the two-level matching technology based on rule and case reasoning is adopted to solve the problem of product matching in the configuration design of bridge crane, and the customization process of bridge crane is planned. The architecture of the rapid design system for custom-made bridge crane is built. The development module and technology of the system are described, and the system is developed. At last, the working flow of the system C / S / W is described and the running process of the system is introduced.
【学位授予单位】：中北大学
【学位级别】：硕士
【学位授予年份】：2012
【分类号】：TH215

【相似文献】