基于IFC标准的BIM构件库研究
发布时间：2018-08-19 20:31
【摘要】：BIM技术已逐渐成为国内外建设领域发展的热点方向,国际上有多种支持BIM技术的三维信息化软件,但不同软件采用不同的数据格式,导致建设项目信息不能在软件之间有效地共享与交换,信息的不准确、不互通造成了巨大的损失。因此,迫切需要规范并统一工程项目的数据标准。IFC标准是国际上得到广泛认可的BIM数据标准,通过对IFC标准的研究,提出BIM构件库的建设方案,并研究得到BIM构件库中构件新增、修改、删除的方法。最后,通过实例验证基于IFC标准的BIM构件库建设方案的可行性,为规范并统一BIM软件数据标准提供参考。
[Abstract]:BIM technology has gradually become a hot spot in the field of construction at home and abroad. There are many kinds of three-dimensional information software supporting BIM technology in the world, but different software uses different data formats. As a result, the information of construction project can not be effectively shared and exchanged between the software, and the information is inaccurate, which results in huge losses. Therefore, it is urgent to standardize and unify the data standard of engineering project. IFC standard is a widely accepted BIM data standard in the world. Through the research of IFC standard, the construction scheme of BIM component library is put forward. The methods of adding, modifying and deleting components in BIM component library are studied. Finally, the feasibility of building BIM component library based on IFC standard is verified by an example, which provides a reference for standardizing and unifying BIM software data standard.
【作者单位】： 上海交通大学土木工程系;上海市隧道工程轨道交通设计研究院;
【基金】：上海市科委科研计划项目(15DZ1203400)
【分类号】：TU17
本文编号：2192751
[Abstract]:BIM technology has gradually become a hot spot in the field of construction at home and abroad. There are many kinds of three-dimensional information software supporting BIM technology in the world, but different software uses different data formats. As a result, the information of construction project can not be effectively shared and exchanged between the software, and the information is inaccurate, which results in huge losses. Therefore, it is urgent to standardize and unify the data standard of engineering project. IFC standard is a widely accepted BIM data standard in the world. Through the research of IFC standard, the construction scheme of BIM component library is put forward. The methods of adding, modifying and deleting components in BIM component library are studied. Finally, the feasibility of building BIM component library based on IFC standard is verified by an example, which provides a reference for standardizing and unifying BIM software data standard.
【作者单位】： 上海交通大学土木工程系;上海市隧道工程轨道交通设计研究院;
【基金】：上海市科委科研计划项目(15DZ1203400)
【分类号】：TU17
【相似文献】
相关期刊论文 前3条
1 于小雅;;施工阶段信息化的新探索[J];中国建设信息;2013年24期
2 李伟伟;王强强;王瑜;;设计企业BIM构件库建设方法[J];土木建筑工程信息技术;2012年04期
3 王瑞;赵卫东;;中国古建筑三维构件库设计研究[J];计算机与现代化;2011年01期
相关会议论文 前1条
1 冯延力;;面向建筑工程设计的BIM产品构件分析及构件库管理系统建设[A];信息化推动工程建设工业化——第四届工程建设计算机应用创新论坛论文集[C];2013年
相关重要报纸文章 前2条
1 郑闻文;建筑化身“变形金刚” 90个标准化构件“拼出”房型[N];中华建筑报;2014年
2 杨舟;让烟草项目成为“绿色工房”[N];建筑时报;2010年
相关硕士学位论文 前2条
1 韩婷婷;基于BIM的明清古建筑构件库参数化设计与实现技术研究[D];西安建筑科技大学;2016年
2 施平望;基于IFC标准的构件库研究[D];上海交通大学;2014年
，本文编号：2192751
本文链接：https://www.wllwen.com/kejilunwen/ruanjiangongchenglunwen/2192751.html
