基于Zigbee的云梯消防车射水枪控制系统设计

发布时间：2018-05-04 14:56

本文选题：Zigbee + 云梯车　；参考：《消防科学与技术》2014年11期

【摘要】：设计一种基于Zigbee无线网络的超高层消防车射水枪控制系统,由无线通信网络传输着火点图像信号和射水枪移位控制指令,再通过机械臂代替消防员完成锁定火源的操作,从而减弱了对云梯的负重要求,降低了云梯结构设计难度和材料费用,达到减少消防车制造成本目的。介绍图像采集、图像传输、中央处理等关键技术及系统软件设计,并通过模拟试验验证系统有效性。
[Abstract]:A fire gun control system based on Zigbee wireless network is designed. The wireless communication network transmits the fire point image signal and the fire gun shift control instruction, and then uses the mechanical arm instead of the fireman to complete the operation of locking the fire source. Thus, the requirement of load on the ladder is weakened, the difficulty of structure design and the cost of materials are reduced, and the cost of fire truck manufacture is reduced. The key techniques and software design of image acquisition, image transmission and central processing are introduced, and the effectiveness of the system is verified by simulation test.
【作者单位】：辽宁科技大学电子与信息工程学院;
【基金】：鞍山市民生科技进步行动计划项目“超高度消防射水枪智能无线控制系统的设计”(2011MS10)
【分类号】：TU998.13

【参考文献】