ROV搭载吸力泵安装大型吸力锚方案设计与实践

发布时间：2018-04-18 18:10

本文选题：ROV搭载吸力泵 + 大型吸力锚安装　；参考：《中国海上油气》2017年05期

【摘要】：以珠江口盆地番禺4-2/5-1油田项目为目标,基于ROV(遥控潜水器)搭载吸力泵安装大型吸力锚的特点,对吸力锚顶部布置、吸力锚阀门设计、吸力泵选型及接口设计、吸力锚装船固定和安装索具设计等进行了研究,提出了吸力锚安装工艺流程及相关问题处理方案。现场实践效果表明,ROV搭载吸力泵模式安装大型吸力锚技术与国外已有的单独安装吸力锚案例相比节省了在水下连接锚链和吸力锚的工序和时间,达到了世界同类工程技术的领先水平,为未来同类型吸力锚的水下安装提供了有效的设计和安装经验。
[Abstract]:In Panyu, the Pearl River Mouth Basin 4-2/5-1 oil field project as the goal, based on ROV (ROV) equipped with suction pump features to install a large suction anchor, on top of the suction anchor arrangement, suction anchor valve design, selection and interface design of pump suction, suction anchor for shipment and installation of fixed rigging design and so on, put forward the suction anchor installation the process and problems related to treatment scheme. That practical experience, ROV is equipped with a suction pump mode of installation of large suction anchor technology and the existing installation of single suction anchor under water saving case compared to the chain and the suction anchor connection process and time, reached the leading level in the world of similar engineering for the future, the same type of suction anchor the underwater installation provides effective design and installation experience.

【作者单位】：深圳海油工程水下技术有限公司;
【分类号】：TE95

【相似文献】