海底井口系统密封总成弹塑性分析

发布时间：2018-05-03 02:03

  本文选题：井口系统 + 密封总成　； 参考：《一重技术》2016年05期

【摘要】：采用Inventor软件建立海底井口系统密封总成的三维模型,将模型导入到Abaqus有限元计算软件中,对密封总成下放过程进行计算,分析其在工作过程中的弹塑性性能,最终得到密封总成在下放过程中受力及变形情况,为实际工作提供参考。
[Abstract]:The 3D model of sealant assembly of submarine wellhead system is established by using Inventor software. The model is introduced into Abaqus finite element calculation software to calculate the process of sealing assembly down, and its elastic-plastic performance is analyzed in the working process. Finally, the stress and deformation of the sealing assembly in the process of decentralization are obtained, which provides a reference for practical work.
【作者单位】： 一重集团大连工程技术公司;
【分类号】：TE95
，

本文编号：1836465