通信设备模拟组网系统的研究与实现

发布时间：2018-11-05 17:13

【摘要】：随着计算机技术以及通信技术的迅猛发展,在通信设备组网的管理方面,出现了通信设备种类繁多,统一管理的设备数量较多的情况。要掌握各种设备的应用,并人工地快速高效的管理各种通信设备对于通信技术人员有较大的难度,而且传统的物理设备机房存在着设备类型多、值勤压力大、训练提高难等问题。特别是对于一些高校或者研究机构,由于操作人员较多,设备有限,让每一个人都能快速高效地搭建组网完成相应的实验是不现实的。因此,建立一个综合的模拟仿真训练系统已经成为通信训练发展的必然趋势。随着可视化技术的迅速发展,可视化技术被认为是解决模块化,流程化作业的有效方法。如何使用可视化方法模拟实验,成为通信设备组网研究的关键问题。本文以综合组网训练需求为牵引,在对各种通信设备使用配置,以及可视化技术研究的基础上,设计并实现了一个基于可视化开发的模拟训练系统,不需动用任何实际装备即可进行训练,可节省人力、物力和财力资源。本工具采用B/S架构进行设计,用户通过浏览器去编辑设计通信组网,采用可视化技术进行复杂通信组网的编排,并能对组网和设备进行统一管理。1.本文通过对通信组网的参与者以及各自承担的职责进行分析,针对用户的不同特点设计了用户的管理模块,由管理员角色统一管理用户信息,通过上传用户信息到系统中,来实现对用户的信息录入,系统也实现了对用户信息的查询与编辑功能。不同的角色可以通过该系统完成不同的功能。2.通过对设备类型以及设备之间的关系进行分析,针对组网实际的操作过程,采用数据建模的方法,实现了设备的可视化建模,方便对设备的统一编辑管理,用户可以使用系统提供的设备来进行设备选型,配置接口参数,搭建组网,并上传提交组网。3.为符合用户的操作习惯,提高用户体验,针对设备选配的特点,设计并实现了设备选配机制。用户通过上传对应的设备图片,通过对图片的拖拽以及其他操作,来搭配板卡,配置接口等。根据不同设备的特点,会显示设备可选的板卡,并将板卡信息以及接口信息添加到组网中。通过对可视化技术的研究,本文设计了基于Web的通信设备模拟组网系统。使得组网以可视化的方式进行开发,并利用设备选型,连通性检查机制,使得用户在使用过程中能快速的知道选配的合理性,并将搭建的组网已作业的形式进行临时保存或者提交。实际测试与上线运行结果表明,该系统能够满足用户的要求。
[Abstract]:With the rapid development of computer technology and communication technology, in the management of communication equipment network, there are many kinds of communication equipment and a large number of unified management equipment. In order to master the application of all kinds of equipment and manage all kinds of communication equipments quickly and efficiently, it is very difficult for the communication technicians, and there are many kinds of equipments in the traditional physical equipment room, and the pressure on duty is great. It is difficult to improve training. Especially for some universities or research institutions, because of the large number of operators and limited equipment, it is not realistic for everyone to set up a network quickly and efficiently to complete the corresponding experiments. Therefore, the establishment of a comprehensive simulation training system has become an inevitable trend of communication training development. With the rapid development of visualization technology, visualization technology is considered to be an effective method to solve modularization and workflow operations. How to simulate the experiment with visual method has become a key problem in the research of communication equipment networking. In this paper, a simulation training system based on visual development is designed and implemented on the basis of using configuration of various communication equipment and research of visualization technology. Training can be done without any actual equipment, saving manpower, material and financial resources. The tool is designed with B / S architecture, users can edit and design communication network through browser, use visualization technology to arrange complex communication network, and can manage network and equipment in a unified way. 1. Based on the analysis of the participants in the communication network and their respective responsibilities, this paper designs the user management module according to the different characteristics of the users. The administrator role manages the user information uniformly, and uploads the user information to the system by uploading the user information. The system also realizes the function of querying and editing user information. Different roles can accomplish different functions through the system. 2. 2. Through the analysis of the type of equipment and the relationship between devices, according to the actual operation process of networking, the method of data modeling is used to realize the visual modeling of equipment, which facilitates the unified editing and management of equipment. Users can use the equipment provided by the system to type equipment, configure interface parameters, build a network, and upload to submit the network. 3. In order to meet the user's operating habits and improve the user's experience, the equipment matching mechanism is designed and implemented according to the characteristics of equipment selection. Users upload the corresponding device pictures, drag and drop pictures and other operations, to match the card, configuration interface and so on. According to the characteristics of different devices, the optional card will be displayed, and the card information and interface information will be added to the network. Based on the research of visualization technology, a communication equipment simulation networking system based on Web is designed in this paper. Make the network to be developed in a visual way, and make use of equipment selection, connectivity inspection mechanism, so that users can quickly know the rationality of the selection in the process of use, And will build the form of the network has been temporarily saved or submitted. The actual test and running results show that the system can meet the requirements of users.
【学位授予单位】：西安电子科技大学
【学位级别】：硕士
【学位授予年份】：2015
【分类号】：TN915.0

【相似文献】