高频RFID标签天线丝网印刷工艺

发布时间：2018-06-08 00:34

  本文选题：RFID电子标签 + 刮刀速度　； 参考：《包装工程》2017年09期

【摘要】：目的研究不同丝网印刷工艺对RFID标签性能的影响,得到最优丝网印刷工艺条件组合。方法研究印刷速度、刮印压力、刮印角度、固化条件等参数变化对天线性能参数的影响。结果当刮刀速度为50~70 m/min时,天线的阻抗稳定,印刷成品质量好,天线的可识别距离最大;刮印压力的最优值为100 N/m左右,刮刀角度应大于40°,固化温度大于110℃,固化时间应在20~40 min之间。结论标签阻抗随刮刀速度呈现U形变化,而最大识别距离呈现相反趋势;标签阻抗随刮刀压力和刮刀角度均成U形变化趋势;天线阻抗随着固化时间和固化温度的升高而降低,最大识别距离呈现相反趋势。
[Abstract]:Objective to study the effect of different screen printing processes on RFID tag performance and obtain the optimal combination of screen printing process conditions. Methods the effects of printing speed, press, angle and curing conditions on antenna performance were studied. Results when the speed of scraper is 50 ~ 70 m/min, the impedance of antenna is stable, the quality of printed product is good, the discernable distance of antenna is the largest, the optimum value of scraping pressure is about 100N / m, the angle of scraper should be more than 40 掳, and the curing temperature is more than 110 鈩，

本文编号：1993543