二极管钳位型高压发射桥路研究
[Abstract]:With the rapid development of economy, the demand for mineral resources is increasing day by day. Deep exploration is an effective way to solve the crisis of mineral resources. Controllable source audio detection (Controlled Source Audio-frequency Magnetotelluric,CSAMT) is an effective method for deep detection. It has the advantages of large depth, high working efficiency, high resolution and strong anti-jamming ability. The instrument is composed of transmitter and receiver. High-voltage and high-power emission is helpful to enhance the response signal intensity of magnetotelluric field, improve the signal-to-noise ratio of the collected signal, and increase the resolution of the detecting instrument. As a key device of the transmitting system, the research of the high-voltage and high-power transmitting bridge is of great significance to the improvement of the transmitting efficiency, the detection accuracy and the accuracy of the data interpretation of the transmitting system. In this paper, based on the principle of diode-clamped multilevel inverter, the topology and timing control strategy of diode-clamped high-voltage transmission bridge for electrical source transmitter are presented, according to the requirements of high-voltage and high-power emission exploration by frequency domain electric method, and based on the principle of diode-clamped multilevel inverter. The half-period three-level approximate square wave emission in current continuous mode is realized, and the high-voltage and high-power transmitting device of 1200V/20A is developed. The experimental results show that the transmitter has the characteristics of high transmission power, low resistance of required power devices, low electromagnetic interference and high reliability, which can meet the requirements of audio-frequency magnetotelluric method detection with controllable source.
【学位授予单位】:吉林大学
【学位级别】:硕士
【学位授予年份】:2016
【分类号】:TH763.1
【相似文献】
相关期刊论文 前10条
1 徐秉天;;广义桥路在带电测试中的应用问题[J];电力技术;1980年12期
2 赵永健;;利用反馈使桥路测量线性化[J];工业仪表与自动化装置;1981年01期
3 蔡敏学;恶劣条件下的气桥检测[J];仪器仪表学报;1980年04期
4 黄履环;;桥路搭接问题处治案例[J];城市道桥与防洪;2013年01期
5 赵扬;自动平衡记录仪测量桥路的改进[J];计量与测试技术;1995年05期
6 吴玉岩;;应变检测的一种新桥路[J];工业仪表与自动化装置;1985年05期
7 万子芬 ,李剑;消除温度漂移的桥路[J];仪表技术与传感器;1994年04期
8 汪现中;提高桥路信号测量精度的方法[J];电测与仪表;1996年05期
9 张鹏飞;CD-001型氧分析器测量桥路故障的检查与处理[J];电子仪器仪表用户;1995年01期
10 方筠;;高速铁路桥路过渡段施工技术[J];安徽建筑;2008年04期
相关会议论文 前1条
1 李金;燕兵;;铁路桥路管理现状及存在的主要问题[A];高速重载与普通铁路桥隧运营管理与检测修理技术论文集(上册)[C];2010年
相关重要报纸文章 前8条
1 通讯员 蔡政;市财政局率先在大桥路安装停车架[N];安康日报;2009年
2 记者 潘润生;大桥 大路 大美[N];安康日报;2011年
3 珠海特区报评论员;为何一条路建了十几年都没建好[N];珠海特区报;2012年
4 童光丽邋岳跃强 实习生 田波;未来新桥不再偏[N];团结报;2007年
5 记者 田丕 通讯员 杨若愚;大桥路片区建立健全长效机制[N];安康日报;2010年
6 杜钰邋记者 王晶;打通内环“肠梗阻”:年内连接十二桥路和青羊正街[N];成都日报;2008年
7 通讯员 宁建新邋记者 李冀;“小手术”缓解老城支路大问题[N];南京日报;2008年
8 记者 陶玮;解读老照片 喜看新成就[N];嘉兴日报;2008年
相关硕士学位论文 前2条
1 胡越;二极管钳位型高压发射桥路研究[D];吉林大学;2016年
2 张涛;基于灰色理论的高速铁路桥路分界高度选择原则的研究[D];西南交通大学;2006年
,本文编号:2436483
本文链接:https://www.wllwen.com/kejilunwen/yiqiyibiao/2436483.html