基于ZigBee无线环境监测网络系统设计

发布时间：2018-06-16 05:28

本文选题：ZigBee + CC　；参考：《科技通报》2017年04期

【摘要】：针对传统的有线温湿度、空气污染等环境监测系统布线复杂、功耗高、设备维护困难等问题,设计了一种基于ZigBee和CC2530协议的无线传感网络,系统结构简单,有利于恶劣环境下实时监测;该系统以集成增强型8051MCU的CC2530微处理器为主控芯片,利用有线串口技术或者无线GPRS网络实现与上位机之间的通信;然后再通过路由节点连接手机/平板应用程序实时监测环境动态,达到一种双重监测的效果;初步实验测试表明,该系统能够实现性能稳定、功耗低、近距离无线传输,可以较好地满足不同环境下的温湿度、空气污染等环境程度测量和监控的需求。
[Abstract]:A wireless sensor network based on ZigBee and CC2530 protocol is designed to solve the problems of complex wiring, high power consumption and difficult equipment maintenance in traditional environmental monitoring systems such as temperature and humidity, air pollution and so on. The system structure is simple. The system takes the CC2530 microprocessor of 8051 MCU as the main control chip, and realizes the communication between the host computer and the host computer by using the technology of wired serial port or wireless GPRS network. Then the mobile phone / tablet application program is connected to the routing node to monitor the environment in real time, which achieves a dual monitoring effect. The preliminary experimental results show that the system can achieve stable performance, low power consumption, and short distance wireless transmission. It can meet the needs of temperature, humidity, air pollution and other environmental level measurement and monitoring.
【作者单位】：中北大学仪器与电子学院;中北大学仪器科学与动态测试教育部重点实验室;
【基金】：山西省青年科技研究基金(2015021104) 山西省科技攻关项目(2015031007-1) 中北大学科学研究基金
【分类号】：TN92;TP212.9;TP274

【相似文献】